Configuring Wildcard TE220 (4th Gen) with DAHDI

Discussion in 'General' started by possebon, May 16, 2009.

  1. possebon

    Joined:
    Dec 26, 2008
    Messages:
    46
    Likes Received:
    0
    I've been trying to configure the Digium board with Asterisk 1.4 and DAHDI.

    The board is detected but on Asterisk does not have the channels avaliable.


    dahdi_hardware returns:

    dahdi_hardware
    pci:0000:03:08.0 wct4xxp+ d161:0220 Wildcard TE220 (4th Gen)


    On Asterisk, there is no channels avaliable:

    *CLI> dahdi show channels
    Chan Extension Context Language MOH Interpret



    dahdi_scan returns this:


    [1]
    active=yes
    alarms=OK
    description=T2XXP (PCI) Card 0 Span 1
    name=TE2/0/1
    manufacturer=Digium
    devicetype=Wildcard TE220 (4th Gen)
    location=Board ID Switch 0
    basechan=1
    totchans=31
    irq=177
    type=digital-E1
    syncsrc=1
    lbo=0 db (CSU)/0-133 feet (DSX-1)
    coding_opts=HDB3
    framing_opts=CCS,CRC4
    coding=HDB3
    framing=CCS
    [2]
    active=yes
    alarms=RED
    description=T2XXP (PCI) Card 0 Span 2
    name=TE2/0/2
    manufacturer=Digium
    devicetype=Wildcard TE220 (4th Gen)
    location=Board ID Switch 0
    basechan=32
    totchans=31
    irq=177
    type=digital-E1
    syncsrc=1
    lbo=0 db (CSU)/0-133 feet (DSX-1)
    coding_opts=HDB3
    framing_opts=CCS,CRC4
    coding=HDB3
    framing=CCS


    Any help?

    Best regards

    Fernando Possebon
     

Share This Page