Configure D110P in Elastix 2.0.3

Discussion in 'Gateways' started by porce, Feb 11, 2011.

  1. porce

    Joined:
    Feb 9, 2011
    Messages:
    1
    Likes Received:
    0
    Hello,
    it's the first time that I configure a e1 card. I purchase a D110P Openvox card. I install Elastix 2.0.3 . The harware was recognise correctly by the automatic procedure but I can't make or recive calls. dahdi show status and dahdi show channels seems ok.
    There's a guide to configure this card in Elastix?

    Thanks.


    [root@elastix-00 ~]# dahdi_hardware
    pci:0000:05:00.0 wcte11xp+ e159:0001 Digium Wildcard TE110P T1/E1 Board

    elastix-00*CLI> dahdi show status
    Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO
    Digium Wildcard TE110P T1/E1 Card 0 OK 0 0 0 CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)


    elastix-00*CLI> dahdi show channels
    Chan Extension Context Language MOH Interpret Blocked State
    pseudo default default In Service
    1 from-zaptel default In Service
    2 from-zaptel default In Service
    3 from-zaptel default In Service
    4 from-zaptel default In Service
    5 from-zaptel default In Service
    6 from-zaptel default In Service
    7 from-zaptel default In Service
    8 from-zaptel default In Service
    9 from-zaptel default In Service
    10 from-zaptel default In Service
    11 from-zaptel default In Service
    12 from-zaptel default In Service
    13 from-zaptel default In Service
    14 from-zaptel default In Service
    15 from-zaptel default In Service
    17 from-zaptel default In Service
    18 from-zaptel default In Service
    19 from-zaptel default In Service
    20 from-zaptel default In Service
    21 from-zaptel default In Service
    22 from-zaptel default In Service
    23 from-zaptel default In Service
    24 from-zaptel default In Service
    25 from-zaptel default In Service
    26 from-zaptel default In Service
    27 from-zaptel default In Service
    28 from-zaptel default In Service
    29 from-zaptel default In Service
    30 from-zaptel default In Service
    31 from-zaptel default In Service
     
  2. dicko

    Joined:
    Oct 24, 2008
    Messages:
    4,099
    Likes Received:
    0
    You state:

    . . The harware was recognise correctly. . (sic)

    well not quite, what WAS recognised was a Digium Wildcard TE110P T1/E1 Board , this is surely not be the same hardware as an Openpox D110P, or is it? ;) . they certainly look the same . . . hmm, They just aren't. Maybe the digium driver just doesn't support the knock-off clones that well, maybe these guys didn't steal their firmware as successfully as they cloned the hardware, they do claim to use better capacitors however :)

    So shame on you Digium for not supporting the thieves!! . That the "automatic procedure" thought the context should be from-zaptel for an E1 for a pci-id of e159:0001 shows how confused everyone is around this subject.

    Please wait for ali-baba to offer to ssh into your box and mess with your system without disclosure.

    As ever, caveat emptor, you get what you paid for, you would NOT have this trouble if you had paid for a real TE110P from Digium !!

    Come on guys man-up and pay the piper for your tunes, or put up with inevitably continuous and horrible discordance !!

    [/end-rant]
     
  3. fmvillares

    Joined:
    Sep 8, 2007
    Messages:
    1,785
    Likes Received:
    0
    Re: Re:Configure D110P in Elastix 2.0.3

    +1 dick...only problems with opencrap cards but remember they have pass the certification$$$$ for elastix (sic)
     
  4. lisa.gao

    Joined:
    Jul 1, 2010
    Messages:
    39
    Likes Received:
    0
    Dear Porce,
    You just need to add sip extensions, trunk,inbound and outbound to make calls.
    If you need more applications,please refer the E-book: Elastix without tears.
    Any problem, please contact me. My MSN: lingergao@hotmail.com / G talk: opvgaoling@gmail.com

    Best regards!
     
  5. dicko

    Joined:
    Oct 24, 2008
    Messages:
    4,099
    Likes Received:
    0
    As previously stated:

    . . .or put up with inevitably continuous and horrible discordance !!

    o forse

    . . . condizionate con discordanza inevitabilmente continua e orribile!

    apparently he/she at openlox (yes they are fishy) can't read porce's very well constructed "Engrish" so well, in my world he was referring to opendox cloned D110P, NOT anything to do with openfox cloned A2410P , oh well apparently in their world all clones are equal (NOT) . . .

    :):)

    ( I await, with some amusement, baseless whining from many sides here :) )

    dicko
     

Share This Page