Config

Discussion in 'Gateways' started by lopes, Jul 16, 2010.

  1. lopes

    Joined:
    Jul 16, 2010
    Messages:
    41
    Likes Received:
    0
    Good night guys, and here in the good> health for all.

    So what's my problem, I'm new in Asterisk Elastix better.
    I have a server with the following scenario:

    I am in Brazil.
    Elastix 1.6 2-7.
    01 - Card with 08 FXO OpenVox A800p.
    01 - E1 Card OpenVox D110e.

    I have the following channels of trunks:
    3 analog lines (which are on board A800p).
    E1 operator GVT -> R2 signaling.

    What's my doubt, and I ask help from friends:
    Configure the E1 operator GVT -> R2 signaling.

    1 - How to add the configuration in two chan_dahdi.conf canias board with E1 R2 signaling.
    I have no idea where to add the same, and what.

    [Trunkgroups]

    [Channels]
    context = from-pstn
    Signalling = fxs_ks
    rxwink = 300; Atlas "seems to use long (250ms) winks
    usecallerid = yes
    hidecallerid = no
    callwaiting = yes
    usecallingpres = yes
    callwaitingcallerid = yes
    threewaycalling = yes
    transfer = yes
    canpark = yes
    cancallforward = yes
    callreturn = yes
    echocancel = yes
    echocancelwhenbridged = no
    faxdetect = incoming
    echotraining = 800
    rxgain = 0.0
    txgain = 0.0
    callgroup = 1
    pickupgroup = 1

    ; These lines Uncomment if You Have problems with the disconection of your analog lines
    busydetect = yes
    busycount = 2

    immediate = yes
    group = 1
    channel => 32
    channel => 33
    channel => 34
    ; # Include dahdi-channels.conf
    ; # Include chan_dahdi_additional.conf


    2 - The context for this ISDN (dahdi-channels.conf) would like to R2 to carrier GVT.

    ; Span 1: WCT1 / 0 "Digium Wildcard TE110E T1/E1 Card 0"

    My this way:
    group = 0.11
    context = from-pstn
    Switchtype = EuroISDN
    Signalling = pri_cpe
    channel => 1-15,17-31
    context = default
    group = 63

    How would, for R2? If you can could you comment?

    3 - There would be other than mentioned, and I would have done for this E1 (R2) of the operator worked perfectly? I read something regarding the CAS ...

    I ask the help of friends, pos am almost 20 days stopped hunting for information and failed.


    Grateful friends.

    Valmir Lopes
     
  2. lisa.gao

    Joined:
    Jul 1, 2010
    Messages:
    39
    Likes Received:
    0
    Sorry for keep you waiting.
    D110E and A800P can work now? If any problem,please contact us.

    Best regards!
     

Share This Page