Cisco IP Communicator

Discussion in 'General' started by satcomer, Sep 11, 2007.

  1. satcomer

    Joined:
    Sep 10, 2007
    Messages:
    3
    Likes Received:
    0
    Has anyone been able to make the Cisco IP Communicator softphone work with Elastix? Any help would be greatly appreciated.
     
  2. Bananaskin

    Joined:
    Sep 11, 2007
    Messages:
    3
    Likes Received:
    0
    Cisco IP Communicator requires the use of the Skinny Protocol. I would recommend the use of the SCCP projects files at chan-sccp.org. I personally use SCCP from chan-sccp.org on a Trixbox, haven't yet complied it for use on a 1.4.x Asterisk based PBX...e
     
  3. Bananaskin

    Joined:
    Sep 11, 2007
    Messages:
    3
    Likes Received:
    0
    Cisco IP Communicator requires the use of the Skinny Protocol. I would recommend the use of the SCCP projects files at chan-sccp.org. I personally use SCCP from chan-sccp.org on a Trixbox, haven't yet complied it for use on a 1.4.x Asterisk based PBX...e
     
  4. satcomer

    Joined:
    Sep 10, 2007
    Messages:
    3
    Likes Received:
    0
    I have a functional Trixbox running, but am in the process of moving over to Elastix. The new IP Communicator supports SIP (at least with CCM 5). Was just wondering if we could make this work with Elastix. I have the new 2.1.1. version of Communicator.

    http://www.cisco.com/en/US/products/sw/ ... f8e48.html
     

Share This Page