Cisco 7940 Not Showing up in Console - Polycoms Do

Discussion in 'General' started by telemansys, May 21, 2009.

  1. telemansys

    Joined:
    May 7, 2009
    Messages:
    4
    Likes Received:
    0
    Status Says: Phone Unprovisioned

    We followed the same steps as we did with our polycoms and they work. Any tips? Thank you!
     
  2. rafael

    Joined:
    May 14, 2007
    Messages:
    1,454
    Likes Received:
    1
    I guess that Cisco 7940 is not yet supported by the endpoint manager. You may configure by using its web interface of the phone

    Regards,

    rafael
     
  3. Patrick_elx

    Joined:
    Dec 14, 2008
    Messages:
    1,120
    Likes Received:
    0
    The 7940 is supported but you need to make sure that you have the proper files in /tftpboot

    OS79xx.txt
    the proper .bin, .sbn, .loads, .sb2 for the firmware version you are using
    RINGLIST.DAT
    SIPDefault.cnf

    http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79xx
    http://asterisk.agmp.org/uploads/beta/EPC/tftpboot/

    the endpoint configuration will just add a SIP[mac].cnf for your specific phone.

    You will also find some additional xml utils and bmp for the 7940 in this thread:
    http://www.elastix.org/index.php?option=com_fireboard&Itemid=55&func=view&id=14610&catid=3#14610
    http://www.elastix.org/index.php?op...view&id=10346&catid=26&limit=10&limitstart=40

    Also, you have to make sure that the mac address of your phone is in the sqlite database, if not your phone will not be recognized.
    http://www.elastix.org/index.php?option=com_openwiki&Itemid=27&id=phone_mac_address
     

Share This Page