Cisco 7906 Configuration problem.

Discussion in 'General' started by omnisys, Mar 10, 2010.

  1. omnisys

    Joined:
    Jan 8, 2010
    Messages:
    19
    Likes Received:
    0
    Hello.

    I recently got the elastix 1.6.7 running and i connected a brand new cisco 7906 phone....

    the extentions are ok in the elastix and i hit the IP on the phone to start the configuration of the SIP... you know... Elastix IP - Sip password....to register the phone....

    the problem is that in the phone's firmware there is nothing i can change or edit....i can't even put a static ip on the phone device.....

    has anyone tryied these phones?????
     
  2. PSBITGuy

    Joined:
    Aug 18, 2009
    Messages:
    12
    Likes Received:
    0
    I am assuming it is similar to the 7905 or 7912. I haven't used the 7906 phone, so excuse me if I'm wrong.
    Look at this on setting up your phone to download configs via tftp.
    If you have never done this before, be prepared to learn a lot.

    http://www.cisco.com/en/US/docs/voice_i ... #wp1049848

    Also after configuring your phone you will need to turn off NAT and QUALIFY for that extension in Elastix to get it to register.
     

Share This Page