Circuits busy

Discussion in 'General' started by ferdinandbabst, May 4, 2010.

  1. ferdinandbabst

    Joined:
    Mar 23, 2010
    Messages:
    31
    Likes Received:
    0
    Hi

    I have an Elastix server with a PRI Digium card installed and it works fine, however every now and then I get the message "All Circuits are Busy now, please try your call again later". This happens even when there are lots of channels open on the PRI. Running Sip Reload and Dahdi Restart in asterisk CLI seems to eliminate the error for a while but it keeps coming back at random intervals.
    Has anyone had this error and is there anything I can check to eliminate this?
     
  2. hinzinho

    Joined:
    Sep 18, 2009
    Messages:
    461
    Likes Received:
    0
    I had this issue with TE121 card and Elastix 1.6-10. Updated libpri and that seem to fix the issue.
     
  3. hinzinho

    Joined:
    Sep 18, 2009
    Messages:
    461
    Likes Received:
    0
    I jinxed myself.. I have been having this sporadic "circuit busy" issue for the past few days now. Grrr...
     
  4. beerhere

    Joined:
    May 14, 2010
    Messages:
    13
    Likes Received:
    0
    Its could be a configuration issue, about the signaling of the span's or your PRI. Your telco has the line configurated and the pri card has to complate the same configuration.
    This depends of your PRI cards configuration files.
     

Share This Page