Can't receive inbound calls

Discussion in 'General' started by fbarajas, Dec 30, 2010.

  1. fbarajas

    Joined:
    Jun 6, 2009
    Messages:
    15
    Likes Received:
    0
    I have already posted this in spanish, which is my mother tongue, but maybe some non-spanish reader can help me:

    ¡Greetings from México!

    I'm installing Elastix 2.0.3 using a Xorcom Astribank con 1 E1 trunk using R2M

    My problem is that I can make outbound calls without problems, but I can't receive inbound ones.

    When receiving an inbound call, I see the following in CLI:


    New MFC/R2 call detected on chan 1.
    Chan 1 - Far end disconnected. Reason: Normal Clearing
    MFC/R2 call disconnected on channel 1
    MFC/R2 call end on channel 1

    AFAIU, I'm receiving the call (it's detected), but it gets disconnected.

    In dahdi-channels.conf I have the following:

    context=from-pstn
    group=1
    signalling=mfcr2
    mfcr2_variant=mx
    mfcr2_get_ani_first=no
    mfcr2_max_ani=10
    mfcr2_max_dnis=4
    mfcr2_category=national_priority_subscriber
    mfcr2_call_files=yes
    mfcr2_logdir=span1
    mfcr2_logging=all
    mfcr2_mfback_timeout=-1
    mfcr2_metering_pulse_timeout=-1
    channel => 1-10

    What can the problem be? What else shoud I test or post here?

    ¡Gracias de antemano!¡Saludos desde México!

    Estoy instalando un Elastix 2.0.3 usando un Xorcom Astribank con 1 enlace E1 en R2M

    Mi problema ahorita es que las llamadas salen sin problema (es decir, puedo llamar desde aquí a números externos), pero las llamadas no entran.

    Al recibir una llamada, en el CLI aparece lo siguiente:


    New MFC/R2 call detected on chan 1.
    Chan 1 - Far end disconnected. Reason: Normal Clearing
    MFC/R2 call disconnected on channel 1
    MFC/R2 call end on channel 1

    O sea que detecta la llamada, pero se desconecta.

    En mi dahdi-channels.conf tengo:

    context=from-pstn
    group=1
    signalling=mfcr2
    mfcr2_variant=mx
    mfcr2_get_ani_first=no
    mfcr2_max_ani=10
    mfcr2_max_dnis=4
    mfcr2_category=national_priority_subscriber
    mfcr2_call_files=yes
    mfcr2_logdir=span1
    mfcr2_logging=all
    mfcr2_mfback_timeout=-1
    mfcr2_metering_pulse_timeout=-1
    channel => 1-10

    ¿Que puede ser el problema? ¿Que me recomiendan probar?

    Thanks a lot!
     

Share This Page