Cant receive fax on E1/No recibo Fax en el E1

kleyba

Joined
Feb 26, 2010
Messages
5
Likes
0
Points
0
#1
Hello;

I'm having problems receiving faxes on E1. Old pbx was able to receive no problem want replace old pbx with elastix.

see below the log maybe someone can help me?

Thanks!!

Hola;

Tengo problemas con recibir faxes por un E1. El viejo PBX recibia sin problemas queremos reemplazar el PBX con el Elastix.

Aqui abajo esta el log del una transmission talvez alguien me puede ayudar?

Gracias!


Aug 04 11:32:09.28: [ 6414]: SESSION BEGIN 000000011 599959997341225
Aug 04 11:32:09.28: [ 6414]: HylaFAX (tm) Version 4.3.3
Aug 04 11:32:09.28: [ 6414]: CallID: "7378438" "7378438" "<NONE>" "s"
Aug 04 11:32:09.28: [ 6414]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Aug 04 11:32:09.28: [ 6414]: <-- [4:ATA\r]
Aug 04 11:32:13.00: [ 6414]: --> [7]
Aug 04 11:32:13.00: [ 6414]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyIAX1'
Aug 04 11:32:13.00: [ 6414]: STATE CHANGE: ANSWERING -> RECEIVING
Aug 04 11:32:13.00: [ 6414]: RECV FAX: begin
Aug 04 11:32:13.00: [ 6414]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 CC 74 CC>
Aug 04 11:32:13.00: [ 6414]: <-- data [32]
Aug 04 11:32:13.00: [ 6414]: <-- data [2]
Aug 04 11:32:13.96: [ 6414]: --> [7]
Aug 04 11:32:13.96: [ 6414]: <-- HDLC<23:FF C0 02 A6 76 F6 5A A6 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
Aug 04 11:32:13.96: [ 6414]: <-- data [23]
Aug 04 11:32:13.96: [ 6414]: <-- data [2]
Aug 04 11:32:14.70: [ 6414]: --> [7]
Aug 04 11:32:14.70: [ 6414]: <-- HDLC<13:FF C8 01 00 73 5F 23 01 FB C1 01 01 18>
Aug 04 11:32:14.70: [ 6414]: <-- data [13]
Aug 04 11:32:14.70: [ 6414]: <-- data [2]
Aug 04 11:32:15.28: [ 6414]: --> [2]
Aug 04 11:32:15.28: [ 6414]: <-- [9:AT+FRH=3\r]
Aug 04 11:32:22.28: [ 6414]: --> [0:]
Aug 04 11:32:22.28: [ 6414]: MODEM <Empty line>
Aug 04 11:32:22.28: [ 6414]: MODEM TIMEOUT: waiting for v.21 carrier
Aug 04 11:32:22.28: [ 6414]: <-- data [1]
Aug 04 11:32:22.30: [ 6414]: --> [2]
Aug 04 11:32:22.30: [ 6414]: DELAY 1500 ms
Aug 04 11:32:23.80: [ 6414]: <-- [9:AT+FTH=3\r]
Aug 04 11:32:23.82: [ 6414]: --> [7]
Aug 04 11:32:23.82: [ 6414]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 CC 74 CC>
Aug 04 11:32:23.82: [ 6414]: <-- data [32]
Aug 04 11:32:23.82: [ 6414]: <-- data [2]
Aug 04 11:32:25.60: [ 6414]: --> [7]
Aug 04 11:32:25.60: [ 6414]: <-- HDLC<23:FF C0 02 A6 76 F6 5A A6 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
Aug 04 11:32:25.60: [ 6414]: <-- data [23]
Aug 04 11:32:25.60: [ 6414]: <-- data [2]
Aug 04 11:32:26.34: [ 6414]: --> [7]
Aug 04 11:32:26.34: [ 6414]: <-- HDLC<13:FF C8 01 00 73 5F 23 01 FB C1 01 01 18>
Aug 04 11:32:26.34: [ 6414]: <-- data [13]
Aug 04 11:32:26.34: [ 6414]: <-- data [2]
Aug 04 11:32:26.92: [ 6414]: --> [2]
Aug 04 11:32:26.92: [ 6414]: <-- [9:AT+FRH=3\r]
Aug 04 11:32:27.18: [ 6414]: --> [7]
Aug 04 11:32:28.76: [ 6414]: --> HDLC<25:FF C0 C2 6C CC 0C 8C 04 AC 6C 2C 04 9C 04 9C 9C AC 04 04 04 04 04 04 BC 62>
Aug 04 11:32:28.76: [ 6414]: --> [2]
Aug 04 11:32:28.76: [ 6414]: REMOTE TSI "599 9 465 1036"
Aug 04 11:32:28.76: [ 6414]: <-- [9:AT+FRH=3\r]
Aug 04 11:32:29.06: [ 6414]: --> [7]
Aug 04 11:32:29.06: [ 6414]: --> HDLC<9:FF C8 C1 00 60 1F 22 0D DD>
Aug 04 11:32:29.10: [ 6414]: --> [2]
Aug 04 11:32:29.10: [ 6414]: REMOTE wants 9600 bit/s
Aug 04 11:32:29.10: [ 6414]: REMOTE wants A4 page width (215 mm)
Aug 04 11:32:29.10: [ 6414]: REMOTE wants unlimited page length
Aug 04 11:32:29.10: [ 6414]: REMOTE wants 3.85 line/mm
Aug 04 11:32:29.10: [ 6414]: REMOTE wants 2-D MMR
Aug 04 11:32:29.10: [ 6414]: REMOTE wants T.30 Annex A, 256-byte ECM
Aug 04 11:32:29.10: [ 6414]: RECV training at v.29 9600 bit/s
Aug 04 11:32:29.10: [ 6414]: MODEM set XON/XOFF/DRAIN: input ignored, output generated
Aug 04 11:32:29.10: [ 6414]: <-- [10:AT+FRM=96\r]
Aug 04 11:32:29.60: [ 6414]: --> [7]
Aug 04 11:32:31.14: [ 6414]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Aug 04 11:32:31.14: [ 6414]: RECV: TCF 1831 bytes, 8% non-zero, 778 zero-run
Aug 04 11:32:31.14: [ 6414]: RECV: reject TCF (zero run too short, min 1200)
Aug 04 11:32:31.14: [ 6414]: --> [10:NO CARRIER]
Aug 04 11:32:31.14: [ 6414]: <-- [9:AT+FRS=7\r]
Aug 04 11:32:31.20: [ 6414]: --> [2]
Aug 04 11:32:31.20: [ 6414]: <-- [9:AT+FTH=3\r]
Aug 04 11:32:31.22: [ 6414]: --> [7]
Aug 04 11:32:31.22: [ 6414]: <-- HDLC<3:FF C8 22>
Aug 04 11:32:31.22: [ 6414]: <-- data [3]
Aug 04 11:32:31.22: [ 6414]: <-- data [2]
Aug 04 11:32:32.30: [ 6414]: --> [2]
Aug 04 11:32:32.30: [ 6414]: TRAINING failed
Aug 04 11:32:32.30: [ 6414]: <-- [9:AT+FRH=3\r]
Aug 04 11:32:32.52: [ 6414]: --> [7]
Aug 04 11:32:34.10: [ 6414]: --> HDLC<25:FF C0 C2 6C CC 0C 8C 04 AC 6C 2C 04 9C 04 9C 9C AC 04 04 04 04 04 04 BC 62>
Aug 04 11:32:34.10: [ 6414]: --> [2]
Aug 04 11:32:34.10: [ 6414]: REMOTE TSI "599 9 465 1036"
Aug 04 11:32:34.10: [ 6414]: <-- [9:AT+FRH=3\r]
Aug 04 11:32:34.40: [ 6414]: --> [7]
Aug 04 11:32:34.40: [ 6414]: --> HDLC<9:FF C8 C1 00 70 1F 22 4E BE>
Aug 04 11:32:34.46: [ 6414]: --> [2]
Aug 04 11:32:34.46: [ 6414]: REMOTE wants 7200 bit/s
Aug 04 11:32:34.46: [ 6414]: REMOTE wants A4 page width (215 mm)
Aug 04 11:32:34.46: [ 6414]: REMOTE wants unlimited page length
Aug 04 11:32:34.46: [ 6414]: REMOTE wants 3.85 line/mm
Aug 04 11:32:34.46: [ 6414]: REMOTE wants 2-D MMR
Aug 04 11:32:34.46: [ 6414]: REMOTE wants T.30 Annex A, 256-byte ECM
Aug 04 11:32:34.46: [ 6414]: RECV training at v.29 7200 bit/s
Aug 04 11:32:34.46: [ 6414]: MODEM set XON/XOFF/DRAIN: input ignored, output generated
Aug 04 11:32:34.46: [ 6414]: <-- [10:AT+FRM=72\r]
Aug 04 11:32:34.96: [ 6414]: --> [7]
Aug 04 11:32:36.48: [ 6414]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Aug 04 11:32:36.48: [ 6414]: RECV: TCF 1368 bytes, 19% non-zero, 517 zero-run
Aug 04 11:32:36.48: [ 6414]: RECV: reject TCF (too many non-zero, max 10%)
Aug 04 11:32:36.48: [ 6414]: RECV: reject TCF (zero run too short, min 900)
Aug 04 11:32:36.48: [ 6414]: --> [10:NO CARRIER]
Aug 04 11:32:36.48: [ 6414]: <-- [9:AT+FRS=7\r]
Aug 04 11:32:36.54: [ 6414]: --> [2]
Aug 04 11:32:36.54: [ 6414]: <-- [9:AT+FTH=3\r]
Aug 04 11:32:36.56: [ 6414]: --> [7]
Aug 04 11:32:36.56: [ 6414]: <-- HDLC<3:FF C8 22>
Aug 04 11:32:36.56: [ 6414]: <-- data [3]
Aug 04 11:32:36.56: [ 6414]: <-- data [2]
Aug 04 11:32:37.62: [ 6414]: --> [2]
Aug 04 11:32:37.62: [ 6414]: TRAINING failed
Aug 04 11:32:37.62: [ 6414]: <-- [9:AT+FRH=3\r]
Aug 04 11:32:37.84: [ 6414]: --> [7]
Aug 04 11:32:39.42: [ 6414]: --> HDLC<25:FF C0 C2 6C CC 0C 8C 04 AC 6C 2C 04 DC 04 9C 9C AC 04 04 04 04 04 04 BC 62>
Aug 04 11:32:39.42: [ 6414]: --> [5]
Aug 04 11:32:39.42: [ 6414]: MODEM Command error
Aug 04 11:32:39.42: [ 6414]: FCS error
Aug 04 11:32:39.42: [ 6414]: <-- [9:AT+FRS=7\r]
Aug 04 11:32:42.32: [ 6414]: --> [2]
Aug 04 11:32:42.32: [ 6414]: <-- [9:AT+FTH=3\r]
Aug 04 11:32:42.34: [ 6414]: --> [7]
Aug 04 11:32:42.34: [ 6414]: <-- HDLC<3:FF C8 58>
Aug 04 11:32:42.34: [ 6414]: <-- data [3]
Aug 04 11:32:42.34: [ 6414]: <-- data [2]
Aug 04 11:32:43.42: [ 6414]: --> [2]
Aug 04 11:32:43.42: [ 6414]: RECV send CRP (command repeat)
Aug 04 11:32:43.42: [ 6414]: <-- [9:AT+FRH=3\r]
Aug 04 11:32:43.64: [ 6414]: --> [7]
Aug 04 11:32:45.22: [ 6414]: --> HDLC<25:FF C0 C2 6C CC 0C 8C 04 AC 6C 2C 04 9C 04 9C 9C AC 04 04 04 04 04 04 BC 62>
Aug 04 11:32:45.22: [ 6414]: --> [2]
Aug 04 11:32:45.22: [ 6414]: REMOTE TSI "599 9 465 1036"
Aug 04 11:32:45.22: [ 6414]: <-- [9:AT+FRH=3\r]
Aug 04 11:32:45.54: [ 6414]: --> [7]
Aug 04 11:32:45.54: [ 6414]: --> HDLC<9:FF C8 C1 00 50 1F 22 C8 78>
Aug 04 11:32:45.58: [ 6414]: --> [2]
Aug 04 11:32:45.58: [ 6414]: REMOTE wants 4800 bit/s
Aug 04 11:32:45.58: [ 6414]: REMOTE wants A4 page width (215 mm)
Aug 04 11:32:45.58: [ 6414]: REMOTE wants unlimited page length
Aug 04 11:32:45.58: [ 6414]: REMOTE wants 3.85 line/mm
Aug 04 11:32:45.58: [ 6414]: REMOTE wants 2-D MMR
Aug 04 11:32:45.58: [ 6414]: REMOTE wants T.30 Annex A, 256-byte ECM
Aug 04 11:32:45.58: [ 6414]: RECV training at v.27ter 4800 bit/s
Aug 04 11:32:45.58: [ 6414]: MODEM set XON/XOFF/DRAIN: input ignored, output generated
Aug 04 11:32:45.58: [ 6414]: <-- [10:AT+FRM=48\r]
Aug 04 11:32:46.56: [ 6414]: --> [7]
Aug 04 11:32:48.08: [ 6414]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Aug 04 11:32:48.08: [ 6414]: RECV: TCF 914 bytes, 43% non-zero, 197 zero-run
Aug 04 11:32:48.08: [ 6414]: RECV: reject TCF (too many non-zero, max 10%)
Aug 04 11:32:48.08: [ 6414]: RECV: reject TCF (zero run too short, min 600)
Aug 04 11:32:48.08: [ 6414]: --> [10:NO CARRIER]
Aug 04 11:32:48.08: [ 6414]: <-- [9:AT+FRS=7\r]
Aug 04 11:32:48.14: [ 6414]: --> [2]
Aug 04 11:32:48.14: [ 6414]: <-- [9:AT+FTH=3\r]
Aug 04 11:32:48.16: [ 6414]: --> [7]
Aug 04 11:32:48.16: [ 6414]: <-- HDLC<3:FF C8 22>
Aug 04 11:32:48.16: [ 6414]: <-- data [3]
Aug 04 11:32:48.16: [ 6414]: <-- data [2]
Aug 04 11:32:49.24: [ 6414]: --> [2]
Aug 04 11:32:49.24: [ 6414]: TRAINING failed
Aug 04 11:32:49.24: [ 6414]: <-- [9:AT+FRH=3\r]
Aug 04 11:32:49.46: [ 6414]: --> [7]
Aug 04 11:32:51.04: [ 6414]: --> HDLC<25:FF C0 C2 6C CC 0C 8C 04 AC 6C 2C 04 9C 04 9C 9C AC 04 04 04 04 04 04 BC 62>
Aug 04 11:32:51.04: [ 6414]: --> [2]
Aug 04 11:32:51.04: [ 6414]: REMOTE TSI "599 9 465 1036"
Aug 04 11:32:51.04: [ 6414]: <-- [9:AT+FRH=3\r]
Aug 04 11:32:51.34: [ 6414]: --> [7]
Aug 04 11:32:51.34: [ 6414]: --> HDLC<9:FF C8 C1 00 50 1F 22 C8 78>
Aug 04 11:32:51.40: [ 6414]: --> [2]
Aug 04 11:32:51.40: [ 6414]: REMOTE wants 4800 bit/s
Aug 04 11:32:51.40: [ 6414]: REMOTE wants A4 page width (215 mm)
Aug 04 11:32:51.40: [ 6414]: REMOTE wants unlimited page length
Aug 04 11:32:51.40: [ 6414]: REMOTE wants 3.85 line/mm
Aug 04 11:32:51.40: [ 6414]: REMOTE wants 2-D MMR
Aug 04 11:32:51.40: [ 6414]: REMOTE wants T.30 Annex A, 256-byte ECM
Aug 04 11:32:51.40: [ 6414]: RECV training at v.27ter 4800 bit/s
Aug 04 11:32:51.40: [ 6414]: MODEM set XON/XOFF/DRAIN: input ignored, output generated
Aug 04 11:32:51.40: [ 6414]: <-- [10:AT+FRM=48\r]
Aug 04 11:32:52.38: [ 6414]: --> [7]
Aug 04 11:32:53.90: [ 6414]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Aug 04 11:32:53.90: [ 6414]: RECV: TCF 917 bytes, 53% non-zero, 142 zero-run
Aug 04 11:32:53.90: [ 6414]: RECV: reject TCF (too many non-zero, max 10%)
Aug 04 11:32:53.90: [ 6414]: RECV: reject TCF (zero run too short, min 600)
Aug 04 11:32:53.90: [ 6414]: --> [10:NO CARRIER]
Aug 04 11:32:53.90: [ 6414]: <-- [9:AT+FRS=7\r]
Aug 04 11:32:53.96: [ 6414]: --> [2]
Aug 04 11:32:53.96: [ 6414]: <-- [9:AT+FTH=3\r]
Aug 04 11:32:53.98: [ 6414]: --> [7]
Aug 04 11:32:53.98: [ 6414]: <-- HDLC<3:FF C8 22>
Aug 04 11:32:53.98: [ 6414]: <-- data [3]
Aug 04 11:32:53.98: [ 6414]: <-- data [2]
Aug 04 11:32:55.06: [ 6414]: --> [2]
Aug 04 11:32:55.06: [ 6414]: TRAINING failed
Aug 04 11:32:55.06: [ 6414]: <-- [9:AT+FRH=3\r]
Aug 04 11:32:55.28: [ 6414]: --> [7]
Aug 04 11:32:56.86: [ 6414]: --> HDLC<25:FF C0 C2 6C CC 0C 8C 04 AC 6C 2C 04 9C 04 9C 9C AC 04 04 04 04 04 04 BC 62>
Aug 04 11:32:56.86: [ 6414]: --> [2]
Aug 04 11:32:56.86: [ 6414]: REMOTE TSI "599 9 465 1036"
Aug 04 11:32:56.86: [ 6414]: <-- [9:AT+FRH=3\r]
Aug 04 11:32:57.18: [ 6414]: --> [7]
Aug 04 11:32:57.18: [ 6414]: --> HDLC<9:FF C8 C1 00 40 1F 22 8B 1B>
Aug 04 11:32:57.22: [ 6414]: --> [2]
Aug 04 11:32:57.22: [ 6414]: REMOTE wants 2400 bit/s
Aug 04 11:32:57.22: [ 6414]: REMOTE wants A4 page width (215 mm)
Aug 04 11:32:57.22: [ 6414]: REMOTE wants unlimited page length
Aug 04 11:32:57.22: [ 6414]: REMOTE wants 3.85 line/mm
Aug 04 11:32:57.22: [ 6414]: REMOTE wants 2-D MMR
Aug 04 11:32:57.22: [ 6414]: REMOTE wants T.30 Annex A, 256-byte ECM
Aug 04 11:32:57.22: [ 6414]: RECV training at v.27ter fallback mode 2400 bit/s
Aug 04 11:32:57.22: [ 6414]: MODEM set XON/XOFF/DRAIN: input ignored, output generated
Aug 04 11:32:57.22: [ 6414]: <-- [10:AT+FRM=24\r]
Aug 04 11:32:58.44: [ 6414]: --> [7]
Aug 04 11:32:59.96: [ 6414]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Aug 04 11:32:59.96: [ 6414]: RECV: TCF 461 bytes, 2% non-zero, 210 zero-run
Aug 04 11:32:59.96: [ 6414]: RECV: reject TCF (zero run too short, min 300)
Aug 04 11:32:59.96: [ 6414]: --> [10:NO CARRIER]
Aug 04 11:32:59.96: [ 6414]: <-- [9:AT+FRS=7\r]
Aug 04 11:33:00.02: [ 6414]: --> [2]
Aug 04 11:33:00.02: [ 6414]: <-- [9:AT+FTH=3\r]
Aug 04 11:33:00.04: [ 6414]: --> [7]
Aug 04 11:33:00.04: [ 6414]: <-- HDLC<3:FF C8 22>
Aug 04 11:33:00.04: [ 6414]: <-- data [3]
Aug 04 11:33:00.04: [ 6414]: <-- data [2]
Aug 04 11:33:01.12: [ 6414]: --> [2]
Aug 04 11:33:01.12: [ 6414]: TRAINING failed
Aug 04 11:33:01.12: [ 6414]: <-- [9:AT+FRH=3\r]
Aug 04 11:33:01.36: [ 6414]: --> [7]
Aug 04 11:33:02.94: [ 6414]: --> HDLC<25:FF C0 C2 6C CC 0C 8C 04 AC 6C 2C 04 9C 04 9C 9C AC 04 04 04 04 04 04 BC 62>
Aug 04 11:33:02.94: [ 6414]: --> [2]
Aug 04 11:33:02.94: [ 6414]: REMOTE TSI "599 9 465 1036"
Aug 04 11:33:02.94: [ 6414]: <-- [9:AT+FRH=3\r]
Aug 04 11:33:03.24: [ 6414]: --> [7]
Aug 04 11:33:03.24: [ 6414]: --> HDLC<9:FF C8 C1 00 40 1F 22 8B 1B>
Aug 04 11:33:03.28: [ 6414]: --> [2]
Aug 04 11:33:03.28: [ 6414]: REMOTE wants 2400 bit/s
Aug 04 11:33:03.28: [ 6414]: REMOTE wants A4 page width (215 mm)
Aug 04 11:33:03.28: [ 6414]: REMOTE wants unlimited page length
Aug 04 11:33:03.28: [ 6414]: REMOTE wants 3.85 line/mm
Aug 04 11:33:03.28: [ 6414]: REMOTE wants 2-D MMR
Aug 04 11:33:03.28: [ 6414]: REMOTE wants T.30 Annex A, 256-byte ECM
Aug 04 11:33:03.28: [ 6414]: RECV training at v.27ter fallback mode 2400 bit/s
Aug 04 11:33:03.28: [ 6414]: MODEM set XON/XOFF/DRAIN: input ignored, output generated
Aug 04 11:33:03.28: [ 6414]: <-- [10:AT+FRM=24\r]
Aug 04 11:33:07.78: [ 6414]: --> [0:]
Aug 04 11:33:07.78: [ 6414]: MODEM <Empty line>
Aug 04 11:33:07.78: [ 6414]: MODEM TIMEOUT: receiving TCF
Aug 04 11:33:07.78: [ 6414]: <-- data [1]
Aug 04 11:33:07.80: [ 6414]: --> [2]
Aug 04 11:33:07.80: [ 6414]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Aug 04 11:33:07.80: [ 6414]: <-- [9:AT+FRS=7\r]
Aug 04 11:33:07.82: [ 6414]: --> [2]
Aug 04 11:33:07.82: [ 6414]: <-- [9:AT+FTH=3\r]
Aug 04 11:33:07.84: [ 6414]: --> [7]
Aug 04 11:33:07.84: [ 6414]: <-- HDLC<3:FF C8 22>
Aug 04 11:33:07.84: [ 6414]: <-- data [3]
Aug 04 11:33:07.84: [ 6414]: <-- data [2]
Aug 04 11:33:08.92: [ 6414]: --> [2]
Aug 04 11:33:08.92: [ 6414]: TRAINING failed
Aug 04 11:33:08.92: [ 6414]: <-- [9:AT+FRH=3\r]
Aug 04 11:33:09.20: [ 6414]: --> [7]
Aug 04 11:33:10.20: [ 6414]: --> HDLC<5:FF C8 DF 59 6F>
Aug 04 11:33:10.24: [ 6414]: --> [2]
Aug 04 11:33:10.24: [ 6414]: RECV FAX: RSPREC error/got DCN
Aug 04 11:33:10.24: [ 6414]: RECV FAX: end
Aug 04 11:33:10.24: [ 6414]: SESSION END
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,902
Messages
130,887
Members
17,566
Latest member
Fpino
Top