can't dial any other extension??

Joined
Feb 24, 2007
Messages
338
Points
0
can't dial any other extension?? Just migrated this system over from tb and need it running in the morning.
Here is the log dialing from ext 120 to ext 110. My snom phones display reads declined: 110 fast busy.

k
-- Executing [s@macro-vm:3] GotoIf("SIP/120-090ac600", "1?vmx|1") in new stack
-- Goto (macro-vm,vmx,1)
-- Executing [vmx@macro-vm:1] GotoIf("SIP/120-090ac600", "0?s-|1") in new stack
-- Executing [vmx@macro-vm:2] Set("SIP/120-090ac600", "MODE=unavail") in new stack
-- Executing [vmx@macro-vm:3] GotoIf("SIP/120-090ac600", "1?notdirect") in new stack
-- Goto (macro-vm,vmx,5)
-- Executing [vmx@macro-vm:5] NoOp("SIP/120-090ac600", "Checking if ext 110 is enabled: ") in new stack
-- Executing [vmx@macro-vm:6] GotoIf("SIP/120-090ac600", "1?s-|1") in new stack
-- Goto (macro-vm,s-,1)
-- Executing [110@from-internal:2] Hangup("SIP/120-090ac600", "") in new stack
== Spawn extension (from-internal, 110, 2) exited non-zero on 'SIP/120-090ac600'
-- Executing [h@from-internal:1] Macro("SIP/120-090ac600", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("SIP/120-090ac600", "w") in new stack
-- Executing [s@macro-hangupcall:2] NoCDR("SIP/120-090ac600", "") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("SIP/120-090ac600", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("SIP/120-090ac600", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("SIP/120-090ac600", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("SIP/120-090ac600", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/120-090ac600' in macro 'hangupcall'
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/120-090ac600'
-- Remote UNIX connection
-- Remote UNIX connection disconnected
-- Executing [110@from-internal:1] Macro("SIP/120-090ac600", "exten-vm|110|110") in new stack
-- Executing [s@macro-exten-vm:1] Macro("SIP/120-090ac600", "user-callerid") in new stack
-- Executing [s@macro-user-callerid:1] NoOp("SIP/120-090ac600", "user-callerid: device 120") in new stack
-- Executing [s@macro-user-callerid:2] Set("SIP/120-090ac600", "AMPUSER=120") in new stack
-- Executing [s@macro-user-callerid:3] GotoIf("SIP/120-090ac600", "0?report") in new stack
-- Executing [s@macro-user-callerid:4] ExecIf("SIP/120-090ac600", "1|Set|REALCALLERIDNUM=120") in new stack
-- Executing [s@macro-user-callerid:5] NoOp("SIP/120-090ac600", "REALCALLERIDNUM is 120") in new stack
-- Executing [s@macro-user-callerid:6] Set("SIP/120-090ac600", "AMPUSER=120") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/120-090ac600", "AMPUSERCIDNAME=Tim") in new stack
-- Executing [s@macro-user-callerid:8] GotoIf("SIP/120-090ac600", "0?report") in new stack
-- Executing [s@macro-user-callerid:9] Set("SIP/120-090ac600", "AMPUSERCID=120") in new stack
-- Executing [s@macro-user-callerid:10] Set("SIP/120-090ac600", "CALLERID(all)="Tim" <120>") in new stack
-- Executing [s@macro-user-callerid:11] Set("SIP/120-090ac600", "REALCALLERIDNUM=120") in new stack
-- Executing [s@macro-user-callerid:12] ExecIf("SIP/120-090ac600", "0|Set|CHANNEL(language)=") in new stack
-- Executing [s@macro-user-callerid:13] NoOp("SIP/120-090ac600", "TTL: ARG1: 110") in new stack
-- Executing [s@macro-user-callerid:14] GotoIf("SIP/120-090ac600", "0?continue") in new stack
-- Executing [s@macro-user-callerid:15] Set("SIP/120-090ac600", "__TTL=64") in new stack
-- Executing [s@macro-user-callerid:16] GotoIf("SIP/120-090ac600", "1?continue") in new stack
-- Goto (macro-user-callerid,s,23)
-- Executing [s@macro-user-callerid:23] NoOp("SIP/120-090ac600", "Using CallerID "Tim" <120>") in new stack
-- Executing [s@macro-exten-vm:2] Set("SIP/120-090ac600", "FROMCONTEXT=exten-vm") in new stack
-- Executing [s@macro-exten-vm:3] Set("SIP/120-090ac600", "VMBOX=110") in new stack
-- Executing [s@macro-exten-vm:4] Set("SIP/120-090ac600", "EXTTOCALL=110") in new stack
-- Executing [s@macro-exten-vm:5] Set("SIP/120-090ac600", "CFUEXT=") in new stack
-- Executing [s@macro-exten-vm:6] Set("SIP/120-090ac600", "CFBEXT=") in new stack
-- Executing [s@macro-exten-vm:7] Set("SIP/120-090ac600", "RT=15") in new stack
-- Executing [s@macro-exten-vm:8] Macro("SIP/120-090ac600", "record-enable|110|IN") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/120-090ac600", "0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("SIP/120-090ac600", "recordingcheck|20080330-212013|1206926413.18") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20080330-212013|1206926413.18: Inbound recording not enabled
-- AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable:5] NoOp("SIP/120-090ac600", "No recording needed") in new stack
-- Executing [s@macro-exten-vm:9] Macro("SIP/120-090ac600", "dial|15|tr|110") in new stack
-- Executing [s@macro-dial:1] GotoIf("SIP/120-090ac600", "1?dial") in new stack
-- Goto (macro-dial,s,3)
-- Executing [s@macro-dial:3] AGI("SIP/120-090ac600", "dialparties.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
dialparties.agi: Starting New Dialparties.agi
== Parsing '/etc/asterisk/manager.conf': Found
== Parsing '/etc/asterisk/manager_additional.conf': Found
== Parsing '/etc/asterisk/manager_custom.conf': Found
== Manager 'admin' logged on from 127.0.0.1
dialparties.agi: Caller ID name is 'Tim' number is '120'
dialparties.agi: Methodology of ring is 'none'
-- dialparties.agi: Added extension 110 to extension map
-- dialparties.agi: Extension 110 cf is disabled
-- dialparties.agi: Extension 110 do not disturb is disabled
dialparties.agi: Extension 110 has ExtensionState: 4
-- dialparties.agi: Checking CW and CFB status for extension 110
-- dialparties.agi: dbset CALLTRACE/110 to 120
-- dialparties.agi: Filtered ARG3: 110
== Manager 'admin' logged off from 127.0.0.1
-- AGI Script dialparties.agi completed, returning 0
-- Executing [s@macro-dial:4] NoOp("SIP/120-090ac600", "Returned from dialparties with no extensions to call and DIALSTATUS: ") in new stack
-- Executing [s@macro-exten-vm:10] Set("SIP/120-090ac600", "SV_DIALSTATUS=") in new stack
-- Executing [s@macro-exten-vm:11] GosubIf("SIP/120-090ac600", "0?docfu|1") in new stack
-- Executing [s@macro-exten-vm:12] GosubIf("SIP/120-090ac600", "0?docfb|1") in new stack
-- Executing [s@macro-exten-vm:13] Set("SIP/120-090ac600", "DIALSTATUS=") in new stack
-- Executing [s@macro-exten-vm:14] NoOp("SIP/120-090ac600", "Voicemail is 110") in new stack
-- Executing [s@macro-exten-vm:15] GotoIf("SIP/120-090ac600", "0?s-|1") in new stack
-- Executing [s@macro-exten-vm:16] NoOp("SIP/120-090ac600", "Sending to Voicemail box 110") in new stack
-- Executing [s@macro-exten-vm:17] Macro("SIP/120-090ac600", "vm|110|") in new stack
-- Executing [s@macro-vm:1] Macro("SIP/120-090ac600", "user-callerid|SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:1] NoOp("SIP/120-090ac600", "user-callerid: Tim 120") in new stack
-- Executing [s@macro-user-callerid:2] Set("SIP/120-090ac600", "AMPUSER=120") in new stack
-- Executing [s@macro-user-callerid:3] GotoIf("SIP/120-090ac600", "0?report") in new stack
-- Executing [s@macro-user-callerid:4] ExecIf("SIP/120-090ac600", "0|Set|REALCALLERIDNUM=120") in new stack
-- Executing [s@macro-user-callerid:5] NoOp("SIP/120-090ac600", "REALCALLERIDNUM is 120") in new stack
-- Executing [s@macro-user-callerid:6] Set("SIP/120-090ac600", "AMPUSER=120") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/120-090ac600", "AMPUSERCIDNAME=Tim") in new stack
-- Executing [s@macro-user-callerid:8] GotoIf("SIP/120-090ac600", "0?report") in new stack
-- Executing [s@macro-user-callerid:9] Set("SIP/120-090ac600", "AMPUSERCID=120") in new stack
-- Executing [s@macro-user-callerid:10] Set("SIP/120-090ac600", "CALLERID(all)="Tim" <120>") in new stack
-- Executing [s@macro-user-callerid:11] Set("SIP/120-090ac600", "REALCALLERIDNUM=120") in new stack
-- Executing [s@macro-user-callerid:12] ExecIf("SIP/120-090ac600", "0|Set|CHANNEL(language)=") in new stack
-- Executing [s@macro-user-callerid:13] NoOp("SIP/120-090ac600", "TTL: 64 ARG1: SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:14] GotoIf("SIP/120-090ac600", "1?continue") in new stack
-- Goto (macro-user-callerid,s,23)
-- Executing [s@macro-user-callerid:23] NoOp("SIP/120-090ac600", "Using CallerID "Tim" <120>") in new stack
-- Executing [s@macro-vm:2] Set("SIP/120-090ac600", "VMGAIN=""") in new stack
-- Executing [s@macro-vm:3] GotoIf("SIP/120-090ac600", "1?vmx|1") in new stack
-- Goto (macro-vm,vmx,1)
-- Executing [vmx@macro-vm:1] GotoIf("SIP/120-090ac600", "0?s-|1") in new stack
-- Executing [vmx@macro-vm:2] Set("SIP/120-090ac600", "MODE=unavail") in new stack
-- Executing [vmx@macro-vm:3] GotoIf("SIP/120-090ac600", "1?notdirect") in new stack
-- Goto (macro-vm,vmx,5)
-- Executing [vmx@macro-vm:5] NoOp("SIP/120-090ac600", "Checking if ext 110 is enabled: ") in new stack
-- Executing [vmx@macro-vm:6] GotoIf("SIP/120-090ac600", "1?s-|1") in new stack
-- Goto (macro-vm,s-,1)
-- Executing [110@from-internal:2] Hangup("SIP/120-090ac600", "") in new stack
== Spawn extension (from-internal, 110, 2) exited non-zero on 'SIP/120-090ac600'
-- Executing [h@from-internal:1] Macro("SIP/120-090ac600", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("SIP/120-090ac600", "w") in new stack
-- Executing [s@macro-hangupcall:2] NoCDR("SIP/120-090ac600", "") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("SIP/120-090ac600", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("SIP/120-090ac600", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("SIP/120-090ac600", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("SIP/120-090ac600", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/120-090ac600' in macro 'hangupcall'
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/120-090ac600'
elastix*CLI>
 
Joined
Apr 8, 2007
Messages
154
Points
0
Hi Tbooth

Which version of Elastix are u using.Have u tried creating two new extensions in the server and tried making a call, cos it could be an issue with the migration, as the log says it cannot find the extension to be called.

Try giving the command sip show peer 120 and see if u can see the details of the IP phone including the IP address
 
Joined
Feb 24, 2007
Messages
338
Points
0
sip show peers does not show the 2 phones that I have registered. The are both working because I can dial into voicemail

This is a 1.0RC I'm testing
 
Joined
Mar 18, 2008
Messages
25
Points
0
hi tbooth...

if this happens after doing an update of freepbx try editing the extension.conf file, and look if doesn't appear (normdial) ...

exten => s,n(normdial),Dial(${ds}) ; dialparties will set the priority to 10 if $ds is not null

if it doesn't just add it...

http://www.elastix.org/index.php?option ... x+update...

hope it helps...
 
Joined
Feb 24, 2007
Messages
338
Points
0
thank you so much
exten => s,n(normdial),Dial(${ds})

was the fix
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,990
Messages
131,103
Members
17,716
Latest member
Orbit114
Top