shlomi #1 Joined Jan 7, 2009 Messages 35 Likes 0 Points 0 Apr 2, 2009 #1 hi guys i have problem i install elastix 1.4 and all fine but when i want to dial * number ( for Example *2080 to my bank) it is failed becuse the elastix code or someting some one can help me what can i do to enable * numbers to dial best regards
hi guys i have problem i install elastix 1.4 and all fine but when i want to dial * number ( for Example *2080 to my bank) it is failed becuse the elastix code or someting some one can help me what can i do to enable * numbers to dial best regards
rafael #2 Joined May 14, 2007 Messages 1,454 Likes 1 Points 0 Apr 2, 2009 #2 perhaps you have an extension with 2080? Normaly you can use *<exten-number> to call the voice mail. Are you using ip phone or a fxs gateway? Regards, Rafael
perhaps you have an extension with 2080? Normaly you can use *<exten-number> to call the voice mail. Are you using ip phone or a fxs gateway? Regards, Rafael
shlomi #3 Joined Jan 7, 2009 Messages 35 Likes 0 Points 0 Apr 2, 2009 #3 hi i dont have ext with the number *2080 but this is not the number isuue i can call any serivce like piza guy *6633 or car rental *9988 and the elastix dont call it out i use sip + fxo analog lines openvox card
hi i dont have ext with the number *2080 but this is not the number isuue i can call any serivce like piza guy *6633 or car rental *9988 and the elastix dont call it out i use sip + fxo analog lines openvox card
rafael #4 Joined May 14, 2007 Messages 1,454 Likes 1 Points 0 Apr 2, 2009 #4 Do you have an outboud route with the "*" as first digit in the dia pattern? If it does not work you may try a dial pattern with a prefix. Something like "*." as a dial pattern in the outbound route should do it for you. Regards, Rafael
Do you have an outboud route with the "*" as first digit in the dia pattern? If it does not work you may try a dial pattern with a prefix. Something like "*." as a dial pattern in the outbound route should do it for you. Regards, Rafael
dicko #5 Joined Oct 24, 2008 Messages 4,099 Likes 0 Points 0 Apr 2, 2009 #5 You can call the bank, correct, after it answers it is the IVR that doesn't respond?. What is tte dtmfmode= in the extension and trunk, try inband or auto instead of rfc2833
You can call the bank, correct, after it answers it is the IVR that doesn't respond?. What is tte dtmfmode= in the extension and trunk, try inband or auto instead of rfc2833
shlomi #6 Joined Jan 7, 2009 Messages 35 Likes 0 Points 0 Apr 2, 2009 #6 i will try it "*." in the dial pattern and get back to you by the way the call not been made at all (for the second replay)
i will try it "*." in the dial pattern and get back to you by the way the call not been made at all (for the second replay)