callerid not working when add fromuser=XXXXXX

Discussion in 'General' started by ermali, Jul 22, 2009.

  1. ermali

    Joined:
    Mar 4, 2009
    Messages:
    34
    Likes Received:
    0
    strange issue when add to Peer Details at Sip Trunk the setting : fromuser=XXXXXXX
    I need to add fromuser=XXXXXXX because i use 3 SIP Trunks.
    When the fromuser setting is not added at sip trunk callerid works but have problem with sip trunks so i need to have "fromuser" and callerid together to work.
    Any help...
     
  2. jgutierrez

    Joined:
    Feb 28, 2008
    Messages:
    5,737
    Likes Received:
    0
    Paste the configuration of your sip trunk, as well, have you edited any configuration file that could have damaged any functionality?
     
  3. ermali

    Joined:
    Mar 4, 2009
    Messages:
    34
    Likes Received:
    0
    Here is sip trunk configuration:

    disallow=all
    allow=ulaw&alaw&g729&g723&gsm
    username=XXXXXXX
    type=peer
    nat=yes
    secret=XXXXXXX
    fromuser=XXXXXXX
    insecure=very
    host=XXXXXXX
    context=from-trunk
    canreinvite=no
    qualify=yes
    defaultexpirey=1800
    dtmfmode=rfc2833&auto
     
  4. jgutierrez

    Joined:
    Feb 28, 2008
    Messages:
    5,737
    Likes Received:
    0
    Also include a CLI output of the call when you use the fromuser flag, and when you don't use it
     

Share This Page