caller id

Discussion in 'General' started by ashir24, Dec 19, 2009.

  1. ashir24

    Joined:
    Sep 1, 2009
    Messages:
    75
    Likes Received:
    0
    Hi

    I have installed elastix 1.5, up and running perfect.
    everything good except the CID.
    been googling, tried all the methods mentioned in "Elastix without tears". still no luck.
    i live in saudi arabia.
    if any tips would be very helpful.

    Regards

    Ashir
     
  2. dicko

    Joined:
    Oct 24, 2008
    Messages:
    4,099
    Likes Received:
    0
    Apparently Saudi Arabia uses some variant of DTMF cid signalling, so first check that the carrier is actually sending CallerID (check with a regular CID enabled phone) then set

    cidsignalling=dtmf
    cidstart=polarity ; or ring
    sendcalleridafter=2 ; or (0 or 1)

    as appropriate

    /etc/asterisk/chan_dahdi.conf
     
  3. ashir24

    Joined:
    Sep 1, 2009
    Messages:
    75
    Likes Received:
    0
    Hi
    Carrier is sending clalerid (i have checked with a regular CID enabled fone).
    i tried the methods you have given. but no luck.
    please advice.

    regards

    Ashir
     
  4. dicko

    Joined:
    Oct 24, 2008
    Messages:
    4,099
    Likes Received:
    0
    Apart from those six options, I suggest you ask another Saudi Asterisk User,

    sorry .

    P.S. you have to stop asterisk and restart dahdi between each change (or reboot) for them to take effect.
     

Share This Page