Caller ID setup question

Discussion in 'General' started by leiw3248, Oct 7, 2009.

  1. leiw3248

    Joined:
    Apr 21, 2008
    Messages:
    476
    Likes Received:
    0
    Hello

    I'm following "Elastix without tear" page 88,
    this page descripted need to edit zapata.conf and zapata-channels.conf
    file for caller ID, but I can't find those files?

    Thank !
     
  2. Patrick_elx

    Joined:
    Dec 14, 2008
    Messages:
    1,120
    Likes Received:
    0
    was replaced in later asterisk versions by dahdi and channel_dahdi
     
  3. leiw3248

    Joined:
    Apr 21, 2008
    Messages:
    476
    Likes Received:
    0
    Hello

    I edited chan_dahdi.conf and dahdi-channels.conf but not working for CID.

    Here's what I set for:

    chan_dahdi.conf:
    [trunkgroups]

    [channels]
    context=from-pstn
    signalling=fxs_ks
    rxwink=300 ; Atlas seems to use long (250ms) winks
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=no
    faxdetect=incoming
    echotraining=800 <--- uncommented
    sendcalleridafter=2 <---- added this line
    rxgain=0.0
    txgain=0.0
    callgroup=1
    pickupgroup=1



    dahdi-channels.conf:
    signalling=fxo_ks
    callerid="Channel 1" <4001>
    mailbox=4001
    group=5
    context=from-internal
    channel => 1
    callerid=
    mailbox=
    group=
    context=default

    ;;; line="4 WCTDM/4/3 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 4
    callerid=
    group=
    context=default
    useincommingcalleridonzaptransfer=yes <---- added this line
     

Share This Page