Caller ID - india

Discussion in 'General' started by dmanghani, Jan 21, 2010.

  1. dmanghani

    Joined:
    Jul 14, 2009
    Messages:
    83
    Likes Received:
    0
    I have just installed WCTDM/4 "Wildcard TDM400P " using elastix download iso every thing is working excepting the caller ID ( which is working ) shows unkown. The caller id comes after the 1st ring

    my etc/asterisk/chan_dahdi.conf:

    [trunkgroups]

    [channels]
    context=from-pstn
    signalling=fxs_ks
    rxwink=300 ; Atlas seems to use long (250ms) winks
    usecallerid=yes
    cidsignalling=dtmf
    cidstart=ring
    sendcallerid=2
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=no
    faxdetect=incoming
    echotraining=800
    rxgain=0.0
    txgain=0.0
    callgroup=1
    pickupgroup=1

    ;Uncomment these lines if you have problems with the disconection of your analog lines
    busydetect=yes
    busycount=3

    immediate=no

    #include dahdi-channels.conf
    #include chan_dahdi_additional.conf

    what all changes are required? Any help would be appreciated.
     
  2. rbo

    rbo

    Joined:
    Oct 20, 2009
    Messages:
    3
    Likes Received:
    0
    try:

    cidstart=polarity
     
  3. vbhoj74

    Joined:
    Dec 11, 2009
    Messages:
    11
    Likes Received:
    0

Share This Page