Call retransfer outbound to outbound

Discussion in 'General' started by Anton, Mar 1, 2009.

  1. Anton

    Joined:
    Feb 26, 2009
    Messages:
    10
    Likes Received:
    0
    When I create cell (or PSTN) phone as extantion and follow me forward is everything ok.
    If I create Misc Application/Destination is now audio.
    From the local both cases working nomally.
    Is someboby know about?
    Thank's!
     
  2. jgutierrez

    Joined:
    Feb 28, 2008
    Messages:
    5,737
    Likes Received:
    0
    please explain again your problem/request in a clearer way
     
  3. Anton

    Joined:
    Feb 26, 2009
    Messages:
    10
    Likes Received:
    0
    Needs create short number for outbound cell or pstn numbers. I did this with Misc Application/Destination.
    Usual calls is ok, but transfer outbound incoming calls to this short is nothing audio.
    Then I try organize a short numer as extention.
    In this case all ok.
    Why is so different?
     
  4. jgutierrez

    Joined:
    Feb 28, 2008
    Messages:
    5,737
    Likes Received:
    0
    ok, please paste the number that you have assigned to your extension, in the version that works and the version that doesn´t work, additionally, when you try to do those calls, you go through a SIP/IAX2/analog trunk?
     
  5. Anton

    Joined:
    Feb 26, 2009
    Messages:
    10
    Likes Received:
    0
    Any numbers was from 70 to 90.
    I use SIP trunks.
     
  6. jgutierrez

    Joined:
    Feb 28, 2008
    Messages:
    5,737
    Likes Received:
    0
    ok, try the following:
    1. Create a custom extension:
    PBX -> PBX Config -> Extensions -> Add Extension -> on device select: other (custom) device
    2. Enter the normal information for the extension, on "User Extension" enter the short number that you want to use, on the field "dial" enter the dial string, for example:
    Local/123456789@from-internal
    where 123456789 would be your cell number or any number, just make sure that the number that you enter is contained within the dial pattern of your outbound routes
     
  7. Anton

    Joined:
    Feb 26, 2009
    Messages:
    10
    Likes Received:
    0
    Yes, this working. The same as Follow Me to write 123456789#
    By the way I found another problem: if I set announcement in the Follow Me setting, outbound call transfered to this short number ending at 2-3 secundes after ann. massage.
     

Share This Page