broken pipe

mfdukn

Joined
Sep 10, 2007
Messages
16
Likes
0
Points
0
#1
Hello to all!
I have fresh installed elastix 1.6 (x86_64)
It works fine as PBX, but i can't setup a2billing(1.3.0 in this elastix)

i get this message when try 'goto' a2b:

Goto (custom-a2billing,somenumber,1)
[Mar 14 11:11:40] VERBOSE[4830] logger.c: -- Executing [somenumber@custom-a2billing:1] DeadAGI("H323/ip$192.168.2.55:1729/12543", "a2billing.php|1" ) in new stack
[Mar 14 11:11:40] WARNING[4830] res_agi.c: Running DeadAGI on a live channel will cause problems, please use AGI
[Mar 14 11:11:40] VERBOSE[4830] logger.c: -- Launched AGI Script /var/lib/asterisk/agi-bin/a2billing.php
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] ERROR[4830] utils.c: write() returned error: Broken pipe
[Mar 14 11:11:40] VERBOSE[4830] logger.c: -- AGI Script a2billing.php completed, returning 0
[Mar 14 11:11:40] VERBOSE[4830] logger.c: -- Executing [somenumber@custom-a2billing:2] Hangup("H323/ip$192.168.2.55:1729/12543", "" ) in new stack

advice, please,where is problem?
 

mfdukn

Joined
Sep 10, 2007
Messages
16
Likes
0
Points
0
#2
Sorry, there was not correct information in first post. not very fresh installed, but after installation of h323 by this procedure: http://asterisk.ru/knowledgebase/asterisk-h323
It is in russian, but it is possible on-line translate.
after this the a2billing became broken, as at first post. :( before it(billing) is working.
my knowledge of linux is not so good to explaine, how this h323 installation affects a2b.
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,901
Messages
130,885
Members
17,562
Latest member
colak
Top