BRI Incoming Working, Outgoing Not Working

Discussion in 'General' started by orbic1, Jan 18, 2011.

  1. orbic1

    Joined:
    Jan 18, 2011
    Messages:
    1
    Likes Received:
    0
    Hello

    We are using Elastix 1.6-13 with FreePBX 2.5.2.2 installed on the Xorcom XR2000 equipment (makes use of Astribanks for the PSTN and ISDN lines). We can make calls in and out on the Analogue lines, but only receive them on the ISDN BRI lines.

    The lines themselves are BT ISDN2e for those famliar with UK telephony. (Essentially euro isdn BRI).

    The Logs look like this:

    Jan 18 19:05:58 NOTICE [2634] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 3
    Jan 18 19:05:59 NOTICE [2634] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 3
    Jan 18 19:05:59 NOTICE [2634] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 3
    Jan 18 19:06:01 NOTICE [2634] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 3
    Jan 18 19:06:01 WARNING [2632] chan_dahdi.c: Call specified, but not found?

    And like the last entry here when a call is attempted over ISDN

    Any ideas or thoughts as to why they would be coming in but not going out?


    Many thanks
     

Share This Page