ATCOM AX400P

Discussion in 'General' started by bernd04, Aug 9, 2009.

  1. bernd04

    Joined:
    Jul 26, 2009
    Messages:
    17
    Likes Received:
    0
    Hi, I'm trying to get a ATCOM AX400P working....

    Under hardware detection, nothing shows.

    Anybody got some help for me on this one?
     
  2. rejil.rajan

    Joined:
    Apr 8, 2007
    Messages:
    154
    Likes Received:
    0
    Hi

    Try running the command zttool and see if the card is detected by asterisk. If there is no cards listed, run the command modprobe wctdm and then configure the file zaptel.conf or system.conf and zapta-auto.conf or chan_dahdi.conf
     
  3. bernd04

    Joined:
    Jul 26, 2009
    Messages:
    17
    Likes Received:
    0
    Thanks for the fast reply. when using zttools it returns a "command not found" error ???
     
  4. rejil.rajan

    Joined:
    Apr 8, 2007
    Messages:
    154
    Likes Received:
    0
    Sorry in the new version it is dahdi_tool
     
  5. rejil.rajan

    Joined:
    Apr 8, 2007
    Messages:
    154
    Likes Received:
    0
    You can also run the following commands to generate the config files

    dahdi_genconf
     
  6. bernd04

    Joined:
    Jul 26, 2009
    Messages:
    17
    Likes Received:
    0
    Thanks, nothing is working... guess the card may be shot...
     
  7. ramoncio

    Joined:
    May 12, 2010
    Messages:
    1,663
    Likes Received:
    0
    Can you see it with "lspci"?
    Is the card listed with the "dahdi_hardware" command? With a + or a - sign?
    What do you see with command "dmesg" after loading the module with "modprobe wctdm" as rejil.rajan told you?
    Don't give up so soon, sometimes you have to do some manual config for some cards to be properly configured.
     
  8. bernd04

    Joined:
    Jul 26, 2009
    Messages:
    17
    Likes Received:
    0
    Boy, I feel so stupid with linux...

    this is the result from dahdi hardware...

    [root@elastix ~]# dahdi_hardware
    pci:0000:01:03.0 wanpipe- 1923:0040 Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card
    [root@elastix ~]#


    This is the output of lspci.. I'd say it is the second-last item. There is also a Sangoma card, which is the last item. OK, whereto now?

    00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
    00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
    00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
    00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
    00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81)
    00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01)
    00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01)
    00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
    01:00.0 Ethernet controller: Accton Technology Corporation EN-1216 Ethernet Adapter (rev 11)
    01:02.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
    01:03.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card


    Ad this one from dmesg...

    [root@elastix ~]# dmesg
    Linux version 2.6.18-92.1.22.el5 (mockbuild@builder16.centos.org) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Tue Dec 16 12:03:43 EST 2008
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 0000000027e40000 (usable)
    BIOS-e820: 0000000027e40000 - 0000000027e50000 (ACPI data)
    BIOS-e820: 0000000027e50000 - 0000000027f00000 (ACPI NVS)
    0MB HIGHMEM available.
    638MB LOWMEM available.
    found SMP MP-table at 000ff780
    Memory for crash kernel (0x0 to 0x0) notwithin permissible range
    disabling kdump
    Using x86 segment limits to approximate NX protection
    On node 0 totalpages: 163392
    DMA zone: 4096 pages, LIFO batch:0
    Normal zone: 159296 pages, LIFO batch:31
    DMI 2.3 present.
    Using APIC driver default
    ACPI: RSDP (v000 ACPIAM ) @ 0x000f7350
    ACPI: RSDT (v001 INTEL D845GLAD 0x20030627 MSFT 0x00000097) @ 0x27e40000
    ACPI: FADT (v001 INTEL D845GLAD 0x20030627 MSFT 0x00000097) @ 0x27e40200
    ACPI: MADT (v001 INTEL D845GLAD 0x20030627 MSFT 0x00000097) @ 0x27e40300
    ACPI: DSDT (v001 INTEL D845GLAD 0x0000010a MSFT 0x0100000d) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 15:2 APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 30000000 (gap: 27f00000:d8100000)
    Detected 2399.834 MHz processor.
    Built 1 zonelists. Total pages: 163392
    Kernel command line: ro root=/dev/VolGroup00/LogVol00
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    CPU 0 irqstacks, hard=c074c000 soft=c072c000
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 639848k/653568k available (2097k kernel code, 13076k reserved, 877k data, 228k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 4801.97 BogoMIPS (lpj=2400985)
    Security Framework v1.0.0 initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    selinux_register_security: Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
    CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 128K
    CPU: Hyper-Threading is disabled
    CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00004400 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU0: Thermal monitoring enabled
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 14k freed
    ACPI: Core revision 20060707
    CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
    Total of 1 processors activated (4801.97 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    Brought up 1 CPUs
    sizeof(vma)=84 bytes
    sizeof(page)=32 bytes
    sizeof(inode)=340 bytes
    sizeof(dentry)=136 bytes
    sizeof(ext3inode)=492 bytes
    sizeof(buffer_head)=52 bytes
    sizeof(skbuff)=172 bytes
    checking if image is initramfs... it is
    Freeing initrd memory: 3062k freed
    NET: Registered protocol family 16
    No dock devices found.
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    Boot video device is 0000:00:02.0
    * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
    * this clock source is slow. If you are sure your timer does not have
    * this bug, please use "acpi_pm_good" to disable the workaround
    PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
    PCI quirk: region 0480-04bf claimed by ICH4 GPIO
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: Power Resource [URP1] (off)
    ACPI: Power Resource [URP2] (off)
    ACPI: Power Resource [FDDP] (off)
    ACPI: Power Resource [LPTP] (off)
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 11 devices
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: 00:09: ioport range 0x400-0x47f could not be reserved
    pnp: 00:09: ioport range 0x680-0x6ff has been reserved
    pnp: 00:09: ioport range 0x480-0x4bf has been reserved
    PCI: Ignore bogus resource 6 [0] of 0000:00:02.0
    PCI: Bridge: 0000:00:1e.0
    IO window: d000-dfff
    MEM window: ff800000-ff8fffff
    PREFETCH window: ee200000-ee2fffff
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    apm: BIOS not found.
    audit: initializing netlink socket (disabled)
    audit(1249916979.771:1): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    SELinux: Registering netfilter hooks
    Initializing Cryptographic API
    ksign: Installing public key data
    Loading keyring
    - Added public key C6715965C252FDCB
    - User ID: CentOS (Kernel Module GPG key)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    ACPI: Processor [CPU1] (supports 8 throttling states)
    ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
    ACPI: Getting cpuindex for acpiid 0x2
    Real Time Clock Driver v1.12ac
    Non-volatile memory driver v1.2
    Linux agpgart interface v0.101 (c) Dave Jones
    agpgart: Detected an Intel 845G Chipset.
    agpgart: Detected 380K stolen memory.
    agpgart: AGP aperture is 128M @ 0xf0000000
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH4: IDE controller at PCI slot 0000:00:1f.1
    PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
    ICH4: chipset revision 1
    ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
    Probing IDE interface ide0...
    hda: ST340014A, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
    hdd: AOPEN DRW4410, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: max request size: 512KiB
    hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
    hda: cache flushes supported
    hda: hda1 hda2
    ide-floppy driver 0.99.newide
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
    PNP: PS/2 controller doesn't have AUX irq; using default 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 4.39
    TCP bic registered
    Initializing IPsec netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Time: tsc clocksource has been installed.
    ACPI: (supports S0 S1 S4 S5)
    Freeing unused kernel memory: 228k freed
    Write protecting the kernel read-only data: 393k
    input: AT Translated Set 2 keyboard as /class/input/input0
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 177, io base 0x0000e800
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000e880
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000ec00
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    SCSI subsystem initialized
    libata version 3.00 loaded.
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: Disabled at runtime.
    SELinux: Unregistering netfilter hooks
    audit(1249916986.558:2): selinux=0 auid=4294967295 ses=4294967295
    i810_smbus 0000:00:02.0: i810/i815 i2c device found.
    intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
    don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if
    you are certain that your <4>intel_rng: system has a functional
    RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
    Linux Tulip driver version 1.1.13 (May 11, 2002)
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 21 (level, low) -> IRQ 193
    tulip0: MII transceiver #1 config 1000 status 786d advertising 01e1.
    eth0: ADMtek Comet rev 17 at e887cc00, 00:30:F1:48:67:A2, IRQ 193.
    ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 17 (level, low) -> IRQ 201
    hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    input: PC Speaker as /class/input/input1
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    lp: driver loaded but no devices found
    ACPI: Power Button (FF) [PWRF]
    ACPI: Sleep Button (CM) [SLPB]
    ibm_acpi: ec object not found
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    device-mapper: multipath: version 1.0.5 loaded
    EXT3 FS on dm-0, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 1310712k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1310712k
    0000:01:00.0: tulip_stop_rxtx() failed
    eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
    dahdi: Telephony Interface Registered on major 196
    dahdi: Version: 2.1.0.4
    dahdi_transcode: Loaded.
    INFO-xpp: revision trunk-r6795 MAX_XPDS=64 (8*8)
    INFO-xpp: FEATURE: without BRISTUFF support
    INFO-xpp: FEATURE: with PROTOCOL_DEBUG
    INFO-xpp: FEATURE: with sync_tick() from DAHDI
    INFO-xpp_usb: revision trunk-r6795
    usbcore: registered new driver xpp_usb
    rxt1: no version for "dahdi_hdlc_putbuf" found: kernel tainted.
    dahdi: Registered tone zone 0 (United States / North America)
    dahdi_dummy: RTC rate is 1024
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    eth0: no IPv6 routers present
    0000:01:00.0: tulip_stop_rxtx() failed
    0000:01:00.0: tulip_stop_rxtx() failed
    eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
    eth0: no IPv6 routers present
     
  9. ramoncio

    Joined:
    May 12, 2010
    Messages:
    1,663
    Likes Received:
    0
    If doesn't appear in dahdi_dahdware, I'm afraid it is not supported, or maybe there is something wrong with the card, but I don't think so.
    See your documentation or ask support for instructions. Many of this clone cards need to patch the dahdi sources in order to work, so maybe you'll have to download elastix's source rpms, patch the needed files and recompile them. But some of those cheap clone cards (as NXTVOX cards) have a terrible support, I hope ATCOM is not too bad. You'll need to know wich kernel module it uses (for analog cards usually is wctdm, but maybe for yours is different). After loading the module with "modprobe wctdm" you should see some messages about the card and installed modules in dmesg. When you achieve this, then you'll need to configure the card with dahdi_genconf and dahdi_cfg.
    But I'm afraid there is no easy solution for your card, you'll most likely need to recompile asterisk and dahdi from source.
     
  10. velez

    Joined:
    Jul 18, 2008
    Messages:
    55
    Likes Received:
    0
    The ax400p is compatible to digium card. You could have a conflict with the Sangoma. Try to remove the Sangoma to see. Even the motherboard could have a conflict in using 2 cards. The ATCOM card (4 ports) works automatically with elastix. the 16 port requires to install the driver and compiled them (20 minute problem) and its well documented in their instructions.
     
  11. Gelevera

    Joined:
    Aug 22, 2010
    Messages:
    143
    Likes Received:
    0
    i have the same problem. and i read about shared irq could be the problem..

    i try disabling all ports not used. like parallel and serial ports.. but the same.

    if I could just manually assign irq..
     
  12. hoangtukasi

    Joined:
    Jul 5, 2012
    Messages:
    7
    Likes Received:
    0
    how remove the Sangoma on Elastix. thanks
     

Share This Page