astribank Xorcom USB

Discussion in 'General' started by heronleal, Feb 1, 2008.

  1. heronleal

    Joined:
    Jan 25, 2008
    Messages:
    33
    Likes Received:
    0
    I have installed a Channel bank of Xorcom. 2 FXO and 6FXS.

    I did install with hardware detection at elastix
    I did edit manually zapata.conf and include to zapata_additional.conf;

    My screen is here attached

    I don't know why appears 12 FXO and 2 FXS?

    at console of SSH there's an error like this:

    ERR-xpp_usb: xusb_xframe_send: failed submit_urb: -90
    ERR-xpp_usb: failed re-submitting read urb, error -90
    Zaptap registered 'sample' char driver on major 33
    Registered Tormenta2 PCI
    Unregistered Tormenta2
    Specify address with base=0xNNNNN
    Wildcard USB FXS Interface driver registered
    NOTICE-xpp: XBUS-00: Using default packet allocators
    ERR-xpp_usb: Failed to initializa xpp usb bus: -19



    My lspci is here:
    [root@elastix asterisk]# lspci
    00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
    00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
    00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
    00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
    00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
    00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
    00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
    00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
    00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
    00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
    00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
    00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01)
    00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
    01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast Ethernet controller (rev 01)
    02:02.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)



    my interrupts here:
    [root@elastix asterisk]# cat /proc/interrupts
    CPU0 CPU1
    0: 60232235 0 IO-APIC-edge timer
    1: 1421 0 IO-APIC-edge i8042
    8: 3 0 IO-APIC-edge rtc
    9: 0 0 IO-APIC-level acpi
    12: 138 0 IO-APIC-edge i8042
    14: 539941 0 IO-APIC-edge ide0
    169: 63121 0 IO-APIC-level eth0
    193: 0 0 IO-APIC-level uhci_hcd:usb3
    201: 181628344 0 IO-APIC-level uhci_hcd:usb1, ehci_hcd:usb5
    209: 84619 0 IO-APIC-level uhci_hcd:usb2, libata
    217: 0 0 IO-APIC-level uhci_hcd:usb4
    225: 184 0 IO-APIC-level HDA Intel
    NMI: 0 0
    LOC: 58419881 58419904
    ERR: 0
    MIS: 0


    Anyone can helP?????

    tks
     
  2. lek

    lek Guest

    What elastix version are you using?

    Please send us the output of the "lszaptel" command.
     

Share This Page