Astribank PRI - unable to dial in or out

Discussion in 'General' started by dvishloff, Jan 18, 2011.

  1. dvishloff

    Joined:
    Jan 18, 2011
    Messages:
    1
    Likes Received:
    0
    Hello All,

    I have an astribank with 1 bri/pri interface. I have the astribank set up to use T1. It is detected by the elastix install. However I can't seem to dial in or out. I believe I need some help in setting up the chan_dahdi.conf.

    This is what is there right now. I haven't changed much. I suspect that I should change signalling=fxs_ks to pri_cpe or something.

    Thanks for your help!

    [trunkgroups]

    [channels]
    context=from-pstn
    signalling=fxs_ks
    rxwink=300 ; Atlas seems to use long (250ms) winks
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=no
    faxdetect=incoming
    echotraining=800
    rxgain=0.0
    txgain=0.0
    callgroup=1
    pickupgroup=1

    ;Uncomment these lines if you have problems with the disconection of your analog lines
    ;busydetect=yes
    ;busycount=3


    immediate=no

    #include dahdi-channels.conf
    #include chan_dahdi_additional.conf
     

Share This Page