All circuits busy - strange behaviour

Discussion in 'General' started by Xexexe, Mar 3, 2010.

  1. Xexexe

    Joined:
    Mar 2, 2010
    Messages:
    12
    Likes Received:
    0
    Hi,

    Long time Elastix user here and first time i could not find the
    solution in the forum :)
    On an Elastix 1.6-12 install the only method of making PSTN calls
    is through a SIP trunk.
    A number of calls fail with the "all circuits are busy" message.
    This usually happens if you hangup a call and try to place another
    immediately after. The call goes through fine after you try 3-4 times.

    This has happened from at least 2 extensions which otherwise work fine.

    Thanks in advance for any suggestions.
     

Share This Page