'all-circuits-busy-now.gsm' dialing inside my PBX

Larrotex

Joined
Jan 14, 2010
Messages
4
Likes
0
Points
0
#1
Hello community.

days ago our PBX was upgraded to Elastix 2.0, for some reason. we dial to ourself pbx number 7452000 and after that system plays "all service are busy now.."

here is some example of CLI, any advice?



-- Executing [s@macro-dialout-trunk:19] Dial("SIP/1206-00001157", "SIP/TELMEX_S P/7452000,300,") in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Called TELMEX_SP/7452000
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Got SIP response 503 "Service Unavailable" back from 10.8.7.81
-- SIP/TELMEX_SP-00001158 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing [s@macro-dialout-trunk:20] NoOp("SIP/1206-00001157", "Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 34") in new stack
-- Executing [s@macro-dialout-trunk:21] Goto("SIP/1206-00001157", "s-CONGESTION ,1") in new stack
-- Goto (macro-dialout-trunk,s-CONGESTION,1)
-- Executing [s-CONGESTION@macro-dialout-trunk:1] Set("SIP/1206-00001157", "RC= 34") in new stack
-- Executing [s-CONGESTION@macro-dialout-trunk:2] Goto("SIP/1206-00001157", "34 ,1") in new stack
-- Goto (macro-dialout-trunk,34,1)
-- Executing [34@macro-dialout-trunk:1] Goto("SIP/1206-00001157", "continue,1") in new stack
-- Goto (macro-dialout-trunk,continue,1)
-- Executing [continue@macro-dialout-trunk:1] GotoIf("SIP/1206-00001157", "1?no report") in new stack
-- Goto (macro-dialout-trunk,continue,3)
-- Executing [continue@macro-dialout-trunk:3] NoOp("SIP/1206-00001157", "TRUNK Dial failed due to CONGESTION HANGUPCAUSE: 34 - failing through to other trunks") i n new stack
-- Executing [continue@macro-dialout-trunk:4] Set("SIP/1206-00001157", "CALLERI D(number)=1206") in new stack
-- Executing [7452000@from-internal:5] Macro("SIP/1206-00001157", "outisbusy,") in new stack
-- Executing [s@macro-outisbusy:1] Progress("SIP/1206-00001157", "") in new sta ck
-- Executing [s@macro-outisbusy:2] GotoIf("SIP/1206-00001157", "0?emergency,1") in new stack
-- Executing [s@macro-outisbusy:3] GotoIf("SIP/1206-00001157", "0?intracompany, 1") in new stack
-- Executing [s@macro-outisbusy:4] Playback("SIP/1206-00001157", "all-circuits- busy-now&pls-try-call-later, noanswer") in new stack
-- <SIP/1206-00001157> Playing 'all-circuits-busy-now.gsm' (language 'es')
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5


Thank you
 

mm.alpha2k

Joined
Jun 19, 2010
Messages
165
Likes
0
Points
0
#2
You sign up trunk, or Telmex do IP to IP?
Here is throwing an error, as the trunk is not configured properly.
The ip 10.8.7.81 not accepting the call.
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,915
Messages
130,920
Members
17,595
Latest member
feparra121
Top