"all circuits are busy" TDM400P

Discussion in 'General' started by hatster, May 24, 2010.

  1. hatster

    Joined:
    May 24, 2010
    Messages:
    1
    Likes Received:
    0
    Hi,

    Excuse the new newbie !

    I have a TDM400P card in a P4 system ( I have removed all but 1 FXO module for testing ). I did a fresh install of elastix 1.6-7

    I can create 2 extensions and am able to dial between the 2.
    I cannot make an outgoing call I just get the "all circuits are busy" message.

    I have provided as much detail as i can think of. does anyone have any suggestions ?

    outbound route: dial pattern is 9|. , trunk sequence is set to "zap/1"
    trunk: dial rule XX. , zap identifier is 1
    system hardware shows: 1 FXO "not in use" in GREEN
    ...................................................................
    pbx*CLI> dahdi show channels
    Chan Extension Context Language MOH Interpret
    ...................................................................

    output from asterisk CLI:
    ...................................................................................
    Connected to Asterisk 1.4.26.1 currently running on pbx (pid = 2999)
    Verbosity was 3 and is now 5
    -- Executing [9676044910@from-internal:1] Macro("SIP/3000-083a3828", "user-c allerid|SKIPTTL|") in new stack
    -- Executing [s@macro-user-callerid:1] Set("SIP/3000-083a3828", "AMPUSER=300 0") in new stack
    -- Executing [s@macro-user-callerid:2] GotoIf("SIP/3000-083a3828", "0?report ") in new stack
    -- Executing [s@macro-user-callerid:3] ExecIf("SIP/3000-083a3828", "1|Set|RE ALCALLERIDNUM=3000") in new stack
    -- Executing [s@macro-user-callerid:4] Set("SIP/3000-083a3828", "AMPUSER=300 0") in new stack
    -- Executing [s@macro-user-callerid:5] Set("SIP/3000-083a3828", "AMPUSERCIDN AME=3000") in new stack
    -- Executing [s@macro-user-callerid:6] GotoIf("SIP/3000-083a3828", "0?report ") in new stack
    -- Executing [s@macro-user-callerid:7] Set("SIP/3000-083a3828", "AMPUSERCID= 3000") in new stack
    -- Executing [s@macro-user-callerid:8] Set("SIP/3000-083a3828", "CALLERID(al l)="3000" <3000>") in new stack
    -- Executing [s@macro-user-callerid:9] Set("SIP/3000-083a3828", "REALCALLERI DNUM=3000") in new stack
    -- Executing [s@macro-user-callerid:10] ExecIf("SIP/3000-083a3828", "0|Set|C HANNEL(language)=") in new stack
    -- Executing [s@macro-user-callerid:11] GotoIf("SIP/3000-083a3828", "1?conti nue") in new stack
    -- Goto (macro-user-callerid,s,20)
    -- Executing [s@macro-user-callerid:20] NoOp("SIP/3000-083a3828", "Using Cal lerID "3000" <3000>") in new stack
    -- Executing [9676044910@from-internal:2] Set("SIP/3000-083a3828", "_NODEST= ") in new stack
    -- Executing [9676044910@from-internal:3] Macro("SIP/3000-083a3828", "record -enable|3000|OUT|") in new stack
    -- Executing [s@macro-record-enable:1] GotoIf("SIP/3000-083a3828", "1?check" ) in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing [s@macro-record-enable:4] AGI("SIP/3000-083a3828", "recordingch eck|20100524-134619|1274712379.2") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
    recordingcheck|20100524-134619|1274712379.2: Outbound recording not enabled
    -- AGI Script recordingcheck completed, returning 0
    -- Executing [s@macro-record-enable:5] MacroExit("SIP/3000-083a3828", "") in new stack
    -- Executing [9676044910@from-internal:4] Macro("SIP/3000-083a3828", "dialou t-trunk|2|676044910||") in new stack
    -- Executing [s@macro-dialout-trunk:1] Set("SIP/3000-083a3828", "DIAL_TRUNK= 2") in new stack
    -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/3000-083a3828", "0?sub-p incheck|s|1") in new stack
    -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/3000-083a3828", "0?disabl etrunk|1") in new stack
    -- Executing [s@macro-dialout-trunk:4] Set("SIP/3000-083a3828", "DIAL_NUMBER =676044910") in new stack
    -- Executing [s@macro-dialout-trunk:5] Set("SIP/3000-083a3828", "DIAL_TRUNK_ OPTIONS=tr") in new stack
    -- Executing [s@macro-dialout-trunk:6] Set("SIP/3000-083a3828", "OUTBOUND_GR OUP=OUT_2") in new stack
    -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/3000-083a3828", "0?nomax" ) in new stack
    -- Executing [s@macro-dialout-trunk:8] GotoIf("SIP/3000-083a3828", "0?chanfu ll") in new stack
    -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/3000-083a3828", "0?skipou tcid") in new stack
    -- Executing [s@macro-dialout-trunk:10] Set("SIP/3000-083a3828", "DIAL_TRUNK _OPTIONS=") in new stack
    -- Executing [s@macro-dialout-trunk:11] Macro("SIP/3000-083a3828", "outbound -callerid|2") in new stack
    -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/3000-083a3828", "0|Se tCallerPres|") in new stack
    -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/3000-083a3828", "0|Se t|REALCALLERIDNUM=3000") in new stack
    -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/3000-083a3828", "1?no rmcid") in new stack
    -- Goto (macro-outbound-callerid,s,6)
    -- Executing [s@macro-outbound-callerid:6] Set("SIP/3000-083a3828", "USEROUT CID=") in new stack
    -- Executing [s@macro-outbound-callerid:7] Set("SIP/3000-083a3828", "EMERGEN CYCID=") in new stack
    -- Executing [s@macro-outbound-callerid:8] Set("SIP/3000-083a3828", "TRUNKOU TCID=") in new stack
    -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/3000-083a3828", "1?tr unkcid") in new stack
    -- Goto (macro-outbound-callerid,s,12)
    -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/3000-083a3828", "0|S et|CALLERID(all)=") in new stack
    -- Executing [s@macro-outbound-callerid:13] GotoIf("SIP/3000-083a3828", "1?e xit") in new stack
    -- Goto (macro-outbound-callerid,s,11)
    -- Executing [s@macro-outbound-callerid:11] MacroExit("SIP/3000-083a3828", " ") in new stack
    -- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/3000-083a3828", "1|AGI|f ixlocalprefix") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
    > fixlocalprefix: Using pattern XX.
    == fixlocalprefix: Dialpattern XX. matched. 676044910 -> 676044910
    -- AGI Script fixlocalprefix completed, returning 0
    -- Executing [s@macro-dialout-trunk:13] Set("SIP/3000-083a3828", "OUTNUM=676 044910") in new stack
    -- Executing [s@macro-dialout-trunk:14] Set("SIP/3000-083a3828", "custom=DAH DI/1") in new stack
    -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/3000-083a3828", "0|Set|D IAL_TRUNK_OPTIONS=M(setmusic^)") in new stack
    -- Executing [s@macro-dialout-trunk:16] Macro("SIP/3000-083a3828", "dialout- trunk-predial-hook|") in new stack
    -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/3000-083a 3828", "") in new stack
    -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/3000-083a3828", "0?bypas s|1") in new stack
    -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/3000-083a3828", "0?custo mtrunk") in new stack
    -- Executing [s@macro-dialout-trunk:19] Dial("SIP/3000-083a3828", "DAHDI/1/6 76044910|300|") in new stack
    == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [s@macro-dialout-trunk:20] Goto("SIP/3000-083a3828", "s-CHANUNA VAIL|1") in new stack
    -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
    -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/3000-083a3828 ", "1?noreport") in new stack
    -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
    -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/3000-083a3828", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 0) - failing through to oth er trunks") in new stack
    -- Executing [9676044910@from-internal:5] Macro("SIP/3000-083a3828", "outisb usy|") in new stack
    -- Executing [s@macro-outisbusy:1] Playback("SIP/3000-083a3828", "all-circui ts-busy-now|noanswer") in new stack
    -- <SIP/3000-083a3828> Playing 'all-circuits-busy-now' (language 'en')
    -- Executing [s@macro-outisbusy:2] Playback("SIP/3000-083a3828", "pls-try-ca ll-later|noanswer") in new stack
    -- <SIP/3000-083a3828> Playing 'pls-try-call-later' (language 'en')
    == Spawn extension (macro-outisbusy, s, 2) exited non-zero on 'SIP/3000-083a38 28' in macro 'outisbusy'
    == Spawn extension (from-internal, 9676044910, 5) exited non-zero on 'SIP/3000 -083a3828'
    -- Executing [h@from-internal:1] Macro("SIP/3000-083a3828", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] ResetCDR("SIP/3000-083a3828", "w") in ne w stack
    -- Executing [s@macro-hangupcall:2] NoCDR("SIP/3000-083a3828", "") in new st ack
    -- Executing [s@macro-hangupcall:3] GotoIf("SIP/3000-083a3828", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,6)
    -- Executing [s@macro-hangupcall:6] GotoIf("SIP/3000-083a3828", "1?skipblkvm ") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] GotoIf("SIP/3000-083a3828", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,11)
    -- Executing [s@macro-hangupcall:11] Hangup("SIP/3000-083a3828", "") in new stack
    == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/3000-083a 3828' in macro 'hangupcall'
    == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/3000-083a3828 '
    pbx*CLI>
    .........................................................................

    :angry:
    Many thanks for any help !

    Kev.
     

Share This Page