after update

Discussion in 'General' started by kostasics, Jul 27, 2009.

  1. kostasics

    Joined:
    Jan 16, 2009
    Messages:
    45
    Likes Received:
    0
    Hi , sfter the last up date my sterisk died and he wont start again .
    (Asterisk ended with exit status 1
    Asterisk died with code 1.
    Automatically restarting Asterisk.)
    Any help ??
     
  2. igort

    Joined:
    May 5, 2008
    Messages:
    13
    Likes Received:
    0
    I have the same problem. For now, I know that this is due to ISDN, dahdi not work well with my HFC-S card...
     
  3. ramoncio

    Joined:
    May 12, 2010
    Messages:
    1,663
    Likes Received:
    0
    See the logs at /var/log/asterisk/full

    You will see why it can't start there.
     
  4. ramoncio

    Joined:
    May 12, 2010
    Messages:
    1,663
    Likes Received:
    0
    If you can't get it going you can try this:

    Code:
    cd /usr/src
    amportal stop
    /etc/init.d/dahdi stop
    mv /usr/lib/asterisk/modules /usr/lib/asterisk/modules-`date +%Y-%m-%d-%Hh%Mm`
    yum -y install subversion
    svn export http://dev.irontec.com/svn/asterisk-es-rsp/team/Odicha --username guest --password guest
    cd Odicha/old-odistuff/libpri-1.4.9/
    make clean&& make && make install
    cd ../dahdi-linux-2.1.0.4
    make clean && make && make install
    cd ../dahdi-tools-2.1.0.2
    ./configure
    #make menuselect
    make clean && make && make install && make config
    cd ../asterisk-1.4.24
    ./configure
    #make menuselect
    make clean && make && make install && make config
    cd ../../asterisk-addons-1.4.7
    ./configure
    #make menuselect
    make clean && make && make install && make config
    dahdi_cfg -vf
    /etc/init.d/dahdi start
    dahdi_genconf -v
    amportal start
    asterisk -rx "dahdi show channels"
    
    This will install asterisk-es-rsp, which is not the official Elastix package, but it works fine, and it includes support for HCF-S/4S/8S using dahdi and libpri. Of course, you'll need to disable mISDN for all this to work using dahdi.
     
  5. igort

    Joined:
    May 5, 2008
    Messages:
    13
    Likes Received:
    0
    It's not working, i think that svn dir is wrong. After svn export directory structure is different from your example. I have only "/usr/src/Odicha/asterisk-addons-1.4.7". Can you please check svn dir in your example. Thanks.
     
  6. kostasics

    Joined:
    Jan 16, 2009
    Messages:
    45
    Likes Received:
    0
    NOBADY HAVE THE SAME PROBLEM ?
    nobady had a died asterisk after the last update ?
     

Share This Page