A400P Billing problem

Discussion in 'Gateways' started by marcomilano, Apr 23, 2009.

  1. marcomilano

    Joined:
    Apr 23, 2009
    Messages:
    1
    Likes Received:
    0
    Helo,
    The problem is that all outgoing calls results always answered even if the number called is busy or not responding.
    In this way you will not be able to do billin on analog lines. Is this possible?

    I use: Elastix with Asterisk 1.4.21-2 - FreePBX 2.5 - A400P10

    Show Asterisk CLI to outgoing call on zap channel 1.

    [KPBX*CLI> -- Executing [s@macro-dialout-trunk:18][1;36;40mGotoIf[0;37;40m("[1;35;40mSIP/102-b7ca6930[0;37;40m","[1;35;40m0?customtrunk[0;37;40m") in new stack
    [KPBX*CLI> -- Executing [s@macro-dialout-trunk:19][1;36;40mDial[0;37;40m("[1;35;40mSIP/102-b7ca6930[0;37;40m","[1;35;40mZAP/1/[NUMBER]|300|twTW[0;37;40m") in new stack
    [KPBX*CLI> -- Called 1/[NUMBER]
    [KPBX*CLI> -- Zap/1-1 answered SIP/102-b7ca6930
    [KPBX*CLI> -- Hungup 'Zap/1-1'

    Always answered even if the number called is busy or not responding. In this case, not responding.

    My zaptel.conf e zapata.conf

    zaptel.conf
    fxsks=1

    loadzone = it
    defaultzone = it

    zapata.conf
    [trunkgroups]

    [channels]

    language=it
    context=from-zaptel
    signalling=fxs_ks
    rxwink=300
    usecallerid=yes
    hidecallerid=no
    callwaiting=no
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=yes
    echotraining=800
    rxgain=4.0
    txgain=0.0
    group=0
    callgroup=1
    pickupgroup=1
    immediate=no
    relaxdtmf=yes
    faxdetect=incoming
    group=0
    channel => 1
     

Share This Page