A100P - some little problems

Discussion in 'Gateways' started by danardf, Jan 27, 2009.

  1. danardf

    Joined:
    Dec 3, 2007
    Messages:
    8,069
    Likes Received:
    12
    Hi all.

    I bought a A100P (FXO) card.
    All seem work. But 2 problems appears

    1 - the callerid not appear.
    2 - When i receive a call, there's 5 ring tone before that all phones ringing. It's not immediate.

    Look the following config file :

    zaptel.conf

    Code:
    # Span 1: WCFXO/0 "Wildcard X100P Board 1" (MASTER)
    fxsks=1
    
    # Global data
    
    loadzone        = fr
    defaultzone     = fr
    zapata.conf:
    Code:
    [trunkgroups]
    
    [global]
    loadzone=fr
    defaultzone=fr
    
    [channels]
    context=from-zaptel
    signalling=fxs_ks
    rxwink=250              ; Atlas seems to use long (250ms) winks
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    ;echocancel=yes
    echocancelwhenbridged=no
    faxdetect=incoming
    ;echotraining=800
    rxgain=0.0
    txgain=0.0
    callgroup=1
    pickupgroup=1
    sendcalleridafter=2
    
    ;Uncomment these lines if you have problems with the disconection of your analog lines
    busydetect=yes
    busycount=3
    
    
    immediate=yes
    
    #include zapata_additional.conf
    #include zapata-channels.conf
     
  2. danardf

    Joined:
    Dec 3, 2007
    Messages:
    8,069
    Likes Received:
    12
    I find the second problem:
    I sis change the cadence information:

    Into zapata.conf:

    candence=1500,3500

    It's more fastly (2 or 3 ring)
    At the first ring, I have the zapata information and after (1 and 2 ring) all phones ringing.

    like this information on this link:

    Code:
    ; You can define your own custom ring cadences here. You can define up to 8
    ; pairs. If the silence is negative, it indicates where the callerid spill is
    ; to be placed. Also, if you define any custom cadences, the default cadences
    ; will be turned off.
    ;
    ; Syntax is: cadence=ring,silence[,ring,silence[...]]
    ;
    ; These are the default cadences:
    ;
    ;cadence=125,125,2000,-4000
    ;cadence=250,250,500,1000,250,250,500,-4000
    ;cadence=125,125,125,125,125,-4000
    ;cadence=1000,500,2500,-5000 
     

Share This Page