Search results

  1. Security problem in Xorcom XE2000 running Elastix

    Also, I recommend you to change the passwords and check the fail2ban settings. Meantime you don't know the way how the calls were stolen...
  2. Security problem in Xorcom XE2000 running Elastix

    Hi mario.rocha, FreePBX dialing plan doesn't allow calls between trunks. It means that if the intruder got to your IVR via a trunk then the call could be routed to an extension, a queue etc. But sometimes the call can be eventually routed to another trunk. For example, when there is a FollowMe...
  3. Endpoint configurator behaviour

    Or, at least, don't overwrite already existing common configuration file...
  4. Endpoint configurator behaviour

    I'm using Elastix 2.3. The Endpoint Configurator re-creates the common configuration file each time when I 'set' an endpoint. I would expect that the common file will be created only when it doesn't exist. After that the administrator should be able to customize the file as needed. For example...
  5. A problem to apply config changes on a big PBX

    Bob, Please note that everything works well when the changes have been applied via the Unembedded FreePBX Web interface. As fas as I know both Elastix and FreePBX use the same PHP settings. Kamailio is not a PBX but rather just a SIP proxy server. My customer needs the PBX functionality...
  6. A problem to apply config changes on a big PBX

    I see a strange problem with Elastix 2.2. I have about 4000 SIP extensions defined. If I make a change in an extension configuration and then apply the change by clicking on the "Apply Configuration Changes Here" bar then the changes are applied but the Internet Browser (FireFox or Chrom)...
  7. How to install Xorcom astribank?

    could you connect to Skype? Or, please send me your e-mail address.
  8. How to install Xorcom astribank?

    can you give me SSH access to your server?
  9. How to install Xorcom astribank?

    I see some text formatting problems in my previous post. rpm -Uvh http://updates.xorcom.com/astribank/elastix/repo/freepbx-module-zapauto-0.7.5-1.noarch.rpm /var/lib/asterisk/bin/detect_zap
  10. How to install Xorcom astribank?

    rpm -Uvh http://updates.xorcom.com/astribank/ela ... noarch.rpm and then /var/lib/asterisk/bin/detect_zap
  11. How to install Xorcom astribank?

    rpm -Uvh http://updates.xorcom.com/astribank/ela ... noarch.rpm and then: /var/lib/asterisk/bin/detect_zap
  12. How to install Xorcom astribank?

    I suggest you to go to the nearest computer store and buy a USB2 PCI card.
  13. How to install Xorcom astribank?

    You can try to define options xpp_usb usb1=1 in the /etc/modprobe.d/xpp.conf (The file doesn't exist therefore you have to create it) In my opinion you waste the time. Are you sure that there is no a USB PCI card that you can install? Or, probably, do you have no a free PCI slot?
  14. How to install Xorcom astribank?

    Astribank requires USB2. You can try to install USB 2.0 PCI card in your computer.
  15. How to install Xorcom astribank?

    In /proc/bus/usb/devices you will see the connected devices. So if a USB2 device is connected to the computer you will see Ver=2 for that device. But it doesn't mean that the controller supports 2.0
  16. How to install Xorcom astribank?

    According to lspci your server doesn't have USB 2.0 interface. There is OHCI controller that provides USB 1.1 only: 00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05) This is the reason why Astribank doesn't work. Best regards, Leonid
  17. Unable to Dial through Analog Trunks - Xorcom FXO

    Didn't you try to add one or two 'w' before the called phone number? Did you try to connect a regular telephone to the line? Had you to keep buttons pressed for a long time in order to dial? Leonid
  18. How to install Xorcom astribank?

    Hi, 1. Define XPP_UDEV_SLEEP_TIME=2 in the /etc/dahdi/init.conf 2. Run /usr/share/dahdi/xpp_fxloader reset If it doesn't help then please post output of lspci Best regards, Leonid Fainshtein Xorcom Ltd
  19. auto attendant does not always accept tones

    Did you increase rxgain in zapata*.conf for the PRI channels? If so, then it definitely can affect the DTMF recognition.
  20. I'VE SUCCESSFULLY INTERCONNECTED TWO BOXES BUT...

    Hi, You can do the following: 1. Find the context that freePBX created for your IVR in file extensions_additional.conf. It may be a little bit tricky but I believe you will be able to find it. For example on my PBX: [ivr-2] include => ivr-2-custom include => from-did-direct-ivr include =>...
Top