Search results

  1. itjumper

    phones dont ring but show up in fop

    I have the same problem. But if I pick up the phone, it actually connects to the calling party. The phone just does not ring.
  2. itjumper

    Unable to connect Nokia E71 to elastix

    But I can talk with the same 3g network with some providers. But with some I can registered, but there is no voice (both ways)
  3. itjumper

    Unable to connect Nokia E71 to elastix

    are you using 3g or wifi ?
  4. itjumper

    Cordless SIP phone?

    ATA + home cordless cannot compare to a true Wifi IP phone as you don't see the messages from the asterisk server.
  5. itjumper

    Unable to connect Nokia E71 to elastix

    I have the same problem. I have no problem with 3g -sip-> 1st elastix -iax-> 2nd elastix -iax-> 1st elastix box -sip-> minutebub (provider) but has problem with 3g -sip-> elastix -sip-> minutehub nat should only cause one way audio, but in this case, both sides cannot hear...
  6. itjumper

    remote extension via 3g

    I have a sip trunk from vbuzzer attached to my elastix box. When I connect an extension via wifi to my elastix box, incoming and going calls are good. However, when I connect the same extension via 3g (I am using a Nokia N95), there is no sound at both ends. The only difference in my...
  7. itjumper

    Incoming call assigned to incorrect sip trunk

    I have tried port 5061 and it did not work. But it works with an ATA like spa2102 with the 2nd line @ 5061. What's the difference? How can I mimic an ata with asterisk?
  8. itjumper

    Incoming call assigned to incorrect sip trunk

    Finally figure out what's going on. All trunks (accounts) are registered to local port 5060. This is where the provider communicates with my server. And asterisk got confused. Binding trunks to unique port should fix the problem. Is there a way to bind a trunk to a sepcific local port? I have...
  9. itjumper

    Incoming call assigned to incorrect sip trunk

    I removed trunk 111111 completely, but asterisk still accepts call from that account/trunk and it maps to account 222222. This leads me to think my registration has problem. of course I did a reload and sip show peers only show 222222. oh, just realize that I have call hunting on these lines.
  10. itjumper

    Incoming call assigned to incorrect sip trunk

    I did set max. channel to 1. I removed it, still the same. I think the problem is the wrong channel was associated with the incoming route (trunk) when the channel is established, as it works if only one channel is active. And I can see the correct channel is used.
  11. itjumper

    Incoming call assigned to incorrect sip trunk

    Shouldn't transfer just send the REFER to the incoming channel? It should not use a new channel. It should not do a dial, which will use a new channel. The difference between what I want to do (transfer/refer) is to do the transfer at the provider level, freeing up the incoming channel/trunk...
  12. itjumper

    Incoming call assigned to incorrect sip trunk

    thanks for the suggestion. I will try that. Actually, I may be able to strip the correct channel from the extension variable. But do you think there is something wrong somewhere ?
  13. itjumper

    Incoming call assigned to incorrect sip trunk

    Re:Incoming call assigned to incorrect sip channel I should have said channel instead of trunk. I guess for this case channel and trunk are interchangable since only one channel per trunk. Just one catch-all route going to a "custom destination" [from-pstn] exten => 44,1,Answer exten =>...
  14. itjumper

    Incoming call assigned to incorrect sip trunk

    Using Elastix 1.6-12. I have 2 accounts with CIK, 111111 and 222222. When call coiming in from 111111, it always assigns it to peer 222222. This is normally not a problem, but if I initate a sip REFER, then the incorrect username/password is sent to CIK and the transfer will fail. The...
  15. itjumper

    Clean up old FAX

    I don't see any fax (tiff) in that folder. The folder seems to contain voice recordings. I found the fax in /var/spool/hylafax/recvq though. I need to clean up recordings as well. Thanks for your script.
  16. itjumper

    Clean up old FAX

    How can I clean up (remove) old faxes from elastix ? I have deleted some faxes in Fax Visor, but the tif files are still there. I would like to run a scheduled job to remove fax older than a certain age from Fax Visor and /var/spool/hylafax/recvq Thanks
  17. itjumper

    I am loosing hardware after reboot?

    I have the same problem with earlier version of elastix. Delay the startup of asterisk (I use 6 seconds). That might help.
  18. itjumper

    using asterisk as an extension

    The account is actually set up as an extension on another system. It is not a normal sip trunk, which does not appear on extension.conf. So using asterisk as an extension does make sense. Incoming and outgoing calls work fine just like a normal sip trunk. Going through the doco, the...
  19. itjumper

    SSD and CF

    bad news, sd card corrupted after 1 month. back to hd
  20. itjumper

    FAX not working (incoming)

    It works again after I removed all fax modems and redo from the beginning.
Top