Search results

  1. Login takes me to the FreePBX GUI

    If I go to the Freepbx CLI and type: core show version FreePBX is now Asterisk 11.15.0 built by palosanto @ on a x86_64 running Linux on 2015-01-19 22:36:24 UTC When I log onto the computer I used to go straight to the Elastix GUI, now I am taken to the...
  2. Login takes me to the FreePBX GUI

    Anybody have any idea how I can fix this?
  3. Login takes me to the FreePBX GUI

    I did a yum update on Elastix which completed without error. When I now attempt to login to Elastix, I am now taken directly to the FreePBX GUI rather than being taken to the Elastix GUI. Can anyone tell me how to correct this so that I can log into Elastix again. Thanks Stuart
  4. Can not find Security Module in Menu

    The Security module has disappeared (it did show at one time) from Elastix and does not appear in the Elastixneo theme V dropdown menu that only contains links to 1) Reports, 2) Extras, 3) Addons, 4) Voip Providor and 5) My Extension. Below is the site information which shows the Security...
  5. dahdi-channels.conf not created

    I have installed Elastix 2 and have a TDM2400P card with 2 FXO modules installed. When we install the dahdi-channels.conf file is not created. I need to change the from-pstn to from-zaptel to be able to receive incoming calls but can not do this without having a dahdi-channels.conf file. If...
  6. Can't Access the GUI After Update

    Yes, I am sure that you are correct. Are we able to uninstall this freepbx, and if so how?
  7. Incoming Trunk file

    I currently have Elastix set through the Inbound Trunk to redirect incoming calls to an off site number. I need to change this to redirect to a ring group. What is the physical physical loaction and the name of the file I need to edit to achive this. My PBX GUI is not available since...
  8. Can't Access the GUI After Update

    I have the same problem since doing a yum update. What do I need to do to correct the problem? It is only preventing access to the PBX tab.
  9. Companding ???

    In the main office we have a Digium TDM2400P card with hardware echo cancellation, this is the machine having problems. In a second office we have a Digium TDM800P card with no hardware echo cancellation, this machine has no problems to date. We had purchased g729 licences for both boxes...
  10. Companding ???

    Each morning callers ring, they can hear us but we cannot hear them. When we go to the Elastix box one of the following messages are running accorss the screen continuously; 1) Unable to set SW Companding on channel 0 (reason 4), or 2) Unable to disable SW Companding on echo cancellation...
  11. Location of rtp.conf to change?

    Smoothwall Community Version /var/smoothwall/sipproxy/siproxd.conf rtp high and low ports set here Smoothwall Advanced /modules/sip/usr/bin/smoothwall/ Any changes made in this file will update the siproxy and retain the changes
  12. Location of rtp.conf to change?

    I use both SmoothWall Advanced and SmoothWall community, the sip proxy configuration is in a different location for each. Do you use SmoothWall Advanced or SmoothWall Community version, let me know and I will get the files and their locations tonight.
  13. Location of rtp.conf to change?

    I am changing the RTP ports on Elastix so that I can use the SIP Proxy in SmoothWall Gateway/Firewall which seems to monitor rtp 7070:7120 and notice that there are two rtp.conf files available; /etc/asterisk/rtp.conf /etc/asterisk.elastix/rtp.conf Which of the above files should I edit...
  14. Update to 1.5.2-2.3 and Openfire Disappeared

    After a second shutdown the IM Tab was populated and Openfire has reappeared.
  15. Update to 1.5.2-2.3 and Openfire Disappeared

    I updated Elastix 1.5.2-2 to 1.5.2-2.3 and all seems to OK except when I go to the IM Tab. There is an Openfire button in the top left hand corner of the screen but the frame where openfire would normally appear is white and blank. If this is not intentional, how do I recover Operfire?
  16. Grandstream GXP-2000 issue

    We have Elastix 1.5.2-2 on the local network behind a Smoothwall Advanced Firewall/Gateway with 13 GXP-2000 phones which work well normally. We are sorting out some issues with the Firewall and have been asked by our support people to set the GXP-2000 phones to use "Nat Traversal (Stun)->Yes"...
  17. RTP Debug

    I could use wireshark but I should be getting output after enabling RTP Debug from the Asterisk-CLI. I would like to know where this RTP Debug output is stored on Elastix; 1) In a log file, if so which one and location? 2) Is output meant to appear on the Elastix Asterisk-CLI screen?
  18. RTP Debug

    I am trying to get some information about the RTP traffic to and from the elastix box and remote phones. No UDP traffic for ports 5060 or 10000:20000 is showing on the firewall when calls are being made. I am unable to find the logs when using RTP Debug. The Elastix box is on the local network...
  19. all circuits are busy now on upgrade to 1.5.2-2

    When we were using Elastix 1.3-2 and previous versions our "zapata-channels.conf" file had "context=from-zaptel", rather than the "context-from-pstn" which was the default. We had to change this every time we upgraded to get rid of the "all circuits are busy now" message. In 1.5.2-2...
  20. Remote Extension outgoing voice not heard

    Could this be my problem too? Important thing to look at if you get one way audio problem with Asterisk 1.4.10 and FreePBX 2.3.0 We've had a weird problem where we though that there must be gremlins in the network or providers playing tricks on us. We've tried everything, reviewing our...