Recent content by pucky900

  1. pucky900

    call transfer failed !!!

    here's my notes for dial plans.... sounds like that's your problem Digitmaps: [2-9]11: 911 rule: 211, 311, 411, 511, 611, 711, 811, 911 are dialled immediately 0T: Local operator rule: After dialing "0" the phone waits T seconds and then completes the call automatically 100: Auto-attendant...
  2. pucky900

    call transfer failed !!!

    You may want to check the dial plan for your hard phone. First see if you can transfer from softphone to softphone. If that works, then you know it's the hard phone. I'm using Polycoms and have to add [2-7]xx to my dial plan to get the transfers to work
  3. pucky900

    No Elastix web interface after update

    This throwing me for a loop. Try cleaning up the mirrors and then try a reinstall yum clean all yum reinstall freePBX*
  4. pucky900

    No Elastix web interface after update

    Sorry it took me a while to get back. Seems to be looking for 2.8 on the mirror when you perform the reinstall and it's not on the server. Version 2.7 may be there Try this yum reinstall freePBX-2.7.*
  5. pucky900

    No Elastix web interface after update

    did you ensure that you have PBX in all caps? Will make a difference. yum reinstall freePBX*
  6. pucky900

    Upgraded to the beta and now the GUI is not workin

    and that is the main reason I stop using Trixbox..... it stop working for me.
  7. pucky900

    Upgraded to the beta and now the GUI is not workin

    Something I don't use and not familiar with.
  8. pucky900

    Upgraded to the beta and now the GUI is not workin

    Which modules are you referring too? The only difference that I noticed in Trixbox vs Elastix was using 2 lines on my Polycom Phones. Trixbox automatically provisioned them where in Elastix I had to find a work around. Trixbox was good for me for a couple of years but voice quality became an...
  9. pucky900

    No CDR reports shown anymore

    Mine just started working again so maybe look at it after a week or 2.
  10. pucky900

    Having problem calling into PBX/extensions

    Take a look at your dialing plan. I'm not familiar with Sipura (I'm running Polycom & Aastra phones) but to dial extensions, I have to add "[1-8]xx#" to the sip.cfg file to dial 3 digit extensions. Seems like you have everything working correctly but the system isn't recognizing the short...
  11. pucky900

    No CDR reports shown anymore

    sorry for the repeated posts.... browser hung up
  12. pucky900

    No CDR reports shown anymore

    I recently had the same problem after performing an yum update. Went to check on a number and the CDR hadn't been keeping track of calls for a week. I knew the system was logging the calls and DID but not displaying them. Thought that was odd but would look into it later. Then about a week after...
  13. pucky900

    No CDR reports shown anymore

    I recently had the same problem after performing an yum update. Went to check on a number and the CDR hadn't been keeping track of calls for a week. I knew the system was logging the calls and DID but not displaying them. Thought that was odd but would look into it later. Then about a week after...
  14. pucky900

    No Elastix web interface after update

    You're having the same FreePBX 2.9 problems as everyone else. It breaks Elastix. As I know of now.... it hasn't been fix. You'll have to downgrade to 2.8 to get everything working again.
  15. pucky900

    Upgraded to the beta and now the GUI is not workin

    1. Don't even consider going back to Trixbox. There are a lot of us that have been there and done that and there's a reason we are here. 2. When you say a "broken GUI"? Did you upgrade FreePBX to 2.9? The FreePBX 2.9 upgrade will create havoc on Elastix. As of now (that I know of) there is...
Top