Recent content by JoseVelasco

  1. JoseVelasco

    Problemas con hylafax/avantfax en Elastix 1.6-12

    Bueno, vuelvo a las andadas, ahora intentado configurar un FAX mediante hylafax/avantfax. He creado mi extensión IAX2, he creado un FAX virtual, me llegan email con cada fax entrante en pdf. He instalado avantfax mediante yum install elastix-avantfax He creado un categoría, creo luego...
  2. JoseVelasco

    Elastix 1.6, Huawei 3g and sebi (odicha)

    Hello leevancleef, About chan_sebi, It is not "my" chan_sebi, it is odicha's chan_sebi, I only have modified introducting two new commands to show firmware and version, but I have not touched the chan_sebi performance. By other side, Odicha is working how digium developer in support sebi...
  3. JoseVelasco

    How to setup Speed dials in sip.cnf file

    Hello guys, I would like to set speed dials on Cisco 7940 in a sip .cnf file. I am using SIP firmware, but when I set speed_lineX and speed_labelX in SIP file, the phone does not show this options, but the phone does not report any error. Thanks in advance!
  4. JoseVelasco

    Elastix 1.6, Huawei 3g and sebi (odicha)

    I belive first you must test chan_sebi only, if you are sure chan_sebi works fine, send and receive voice calls correctly then test with nvfax, but probably odicha didn't think in nvfax when he developed this code. ciao.
  5. JoseVelasco

    Elastix 1.6, Huawei 3g and sebi (odicha)

    At first only E169 and E220 are tested (I belive), with voice support modem you could to do and receive calls and SMS, without voice support, only send & receive SMS. Ciao.
  6. JoseVelasco

    Elastix 1.6, Huawei 3g and sebi (odicha)

    Thanks, but it is not my work, it is Odicha's work, I am only a Elastix user that want to use chan_sebi in Elastix (jejeje). The new comands is: "sebi show hardware" and "sebi show version", the first shows imei, vendor, model and firmware version, and the second command shows the chan_sebi...
  7. JoseVelasco

    Elastix 1.6, Huawei 3g and sebi (odicha)

    I told that I talked with Odicha, he told me the chan_sebi included in Elastix 1.6 is old and it has problems with moderm firmwares. The firmware 11.314.12.31.00 is tested with chan_sebi included in Elastix 1.6, but modern firmware will not work properly. The firmware 11.314.21.31.00 is...
  8. JoseVelasco

    Elastix 1.6, Huawei 3g and sebi (odicha)

    I have received an email from Odicha about the problem with chan_sebi and VMware. He told me that he believe that the chan_sebi version implemented in elastix 1.6 is not the last developed by him and with new huawei firmwares does not work properly, because it try to open the audio before hang...
  9. JoseVelasco

    Elastix 1.6, Huawei 3g and sebi (odicha)

    Good news from odicha, odicha will be official asterisk developer!! I suppose that sebi (chan_sebi) and dahdi bri (odi-dahdi) will be in future dahdi releases. Ciao.
  10. JoseVelasco

    Elastix 1.6, Huawei 3g and sebi (odicha)

    I used k3250 with the firmware suggested me odicha, but I tested with vmware image. I talked with odicha this morning about the problem in virtual machine and he asked for the full asterisk log to analyze, he told me now he is too busy but in two weeks he will try to find the problem. Ciao
  11. JoseVelasco

    chan_sebi & Freepbx

    Thank you very much!! I am sure this document is useful to many people! Ciao.
  12. JoseVelasco

    Elastix 1.6, Huawei 3g and sebi (odicha)

    I have tested in a VMWare with Elastix 1.6 and I had the same problem to you, after install chan_mobile I could to use chan_sebi, the calls work but without audio. Ciao.
  13. JoseVelasco

    Elastix 1.6, Huawei 3g and sebi (odicha)

    well, I have sebi working in Elastix 1.6, but only the outgoing calls work, the incoming does not work, the CLI does not show anything about incoming, I will try tomorrow more! Ciao.
  14. JoseVelasco

    Elastix 1.6, Huawei 3g and sebi (odicha)

    I have seen the new Elatix 1.6 comes with huawei 3g support by sebi (odicha). I have installed Elastix 1.6 to test this feature, but I do not see chan_sebi installed. Anyone has tested this feature with Elastix 1.6? or where can I find any documentation about this? Ciao
  15. JoseVelasco

    Elastix 1.6, dahdi y Huawei 3G

    Por lo que veo en el último changelog de Elastix 1.6, odicha ha portado su chan_sebi para funciona con dahdi. ¿Alguno de vosotros lo ha puesto ya en producción? ¿Que tal se comporta en Elastix? ¿Directamente te el huawei 3g como troncales dahdi en el menu de "detectar hardware"? Ciao y...
Top