Setup de RAID en Elastix paso a paso incluyendo recovery

Taken from:

Elastix Application Note #201201091:

 

This document will take you step by step, screen by screen on the setup of RAID at Elastix install
time. Once you get used to the concept and method, you can setup a RAID 1 configuration in less
than a few minutes, and have a little more confidence than the “ChipSet RAID” method.
Read more

Low-Cost Anti-Feedback Paging System for Elastix

Surely, many Elastix users have thought about enabling a paging system, but they don’t want to invest in those expensive IP-based systems that can cost hundreds or thousands of dollars. What some people may not know is that they can use server soundcard for this purpose.

When I first tested it with my simple system, I noticed that there was a problem: a quite annoying acoustic feedback appeared when using a phone close to the paging speakers. This occurs because the audio coming out of the speakers is reintroduced in the phone’s microphone and this triggers the existence of feedback. Later, I will let you know the trick I came out with for solving this problem.

In this experiment, I will plug the output of the soundcard to a tiny audio amplifier of approximately 35 Watts RMS that I got for a really convenient price. To the amplifier’s output I will plug a pair of speakers, which are commonly used for outdoor ambience. All these components are available for little more than $100USD. The first thing to do is enabling the chan_oss module that comes with Elastix, but appears to be disabled by default. Enabling it is very simple, we open the file /etc/Asterisk/modules.conf and comment the line that inhibits loading the chan_oss.so module. Then, a fragment of the file with the commented line.

[code language=”text”]
; Load either OSS or ALSA, not both
; By default, load no console driver
;
noload => chan_alsa.so
;noload => chan_oss.so
[/code]

Chan_oss is a channel that connects to the soundcard. Being a channel, we can make a bridge between a call and the soundcard.

The following will be to edit the configuration file /etc/asterisk/oss.conf and leave it as follows.

[code language=”text”]
[general]
autoanswer=yes
context=from-internal
overridecontext=yes
extension=s
language=en
playbackonly=yes
[/code]

It is important to leave the parameter autoanswer=yes so the soundcard automatically replies when we call. The rest of parameters are well commented in the file oss.conf that comes by default in Elastix.

Finally, we add a new context to our dial plan for calling a paging extension. This context was added in the file /etc/asterisk/extensions_custom.conf

[code language=”text”]
[voceo-neomano]
exten => *2011,1,Dial(console/dsp,20,A(beep))
exten => *2011,n,Hangup()
[/code]

In this way, we can call the extension *2011 and anything we say from the phone, will come out of the soundcard.

Well, thus far is the usual stuff. Now, I’ll let you know the trick I promised 🙂 The idea I came out with for removing the feedback was moving a little the audio frequency that’s coming out of the speaker. In such way, every time the audio is having feedback on the phone it will have a slightly higher frequency, avoiding the same frequency prevailing through the system. Until quite recently this was very difficult, but since Asterisk 1.8 we have a very interesting feature that allows us to make a shift in frequency or “pitch.” To achieve this, I have modified a bit the previous dial plan.

[code language=”text”]
[voceo-neomano]
exten => *2011,1,Set(PITCH_SHIFT(both)=.95)
exten => *2011,n,Dial(console/dsp,20,A(beep))
exten => *2011,n,Hangup()
[/code]

As you can see, we’ve set up a very small frequency offset, using the PITCH_SHIFT function. Ideally, it will be hardly noticeable. However, it should be enough to eliminate the annoying feedback.

I have chosen a value lesser than one, which means that the voice will sound slightly deeper. Well, that’s all; I hope this may come in handy.

Article taken from:
http://www.neomano.com/2011/09/sistema-de-voceo-anti-feedback-de-bajo-costo-para-elastix/

Sistema de paging de bajo costo con Anti-Feedback

Surely, many Elastix users have thought about enabling a paging system, but they don’t want to invest in those expensive IP-based systems that can cost hundreds or thousands of dollars. What some people may not know is that they can use server soundcard for this purpose.

When I first tested it with my simple system, I noticed that there was a problem: a quite annoying acoustic feedback appeared when using a phone close to the paging speakers. This occurs because the audio coming out of the speakers is reintroduced in the phone’s microphone and this triggers the existence of feedback. Later, I will let you know the trick I came out with for solving this problem.

In this experiment, I will plug the output of the soundcard to a tiny audio amplifier of approximately 35 Watts RMS that I got for a really convenient price. To the amplifier’s output I will plug a pair of speakers, which are commonly used for outdoor ambience. All these components are available for little more than $100USD. The first thing to do is enabling the chan_oss module that comes with Elastix, but appears to be disabled by default. Enabling it is very simple, we open the file /etc/Asterisk/modules.conf and comment the line that inhibits loading the chan_oss.so module. Then, a fragment of the file with the commented line.

[code language=”text”]
; Load either OSS or ALSA, not both
; By default, load no console driver
;
noload => chan_alsa.so
;noload => chan_oss.so
[/code]

Chan_oss is a channel that connects to the soundcard. Being a channel, we can make a bridge between a call and the soundcard.

The following will be to edit the configuration file /etc/asterisk/oss.conf and leave it as follows.

[code language=”text”]
[general]
autoanswer=yes
context=from-internal
overridecontext=yes
extension=s
language=en
playbackonly=yes
[/code]

It is important to leave the parameter autoanswer=yes so the soundcard automatically replies when we call. The rest of parameters are well commented in the file oss.conf that comes by default in Elastix.

Finally, we add a new context to our dial plan for calling a paging extension. This context was added in the file /etc/asterisk/extensions_custom.conf

[code language=”text”]
[voceo-neomano]
exten => *2011,1,Dial(console/dsp,20,A(beep))
exten => *2011,n,Hangup()
[/code]

In this way, we can call the extension *2011 and anything we say from the phone, will come out of the soundcard.

Well, thus far is the usual stuff. Now, I’ll let you know the trick I promised 🙂 The idea I came out with for removing the feedback was moving a little the audio frequency that’s coming out of the speaker. In such way, every time the audio is having feedback on the phone it will have a slightly higher frequency, avoiding the same frequency prevailing through the system. Until quite recently this was very difficult, but since Asterisk 1.8 we have a very interesting feature that allows us to make a shift in frequency or “pitch.” To achieve this, I have modified a bit the previous dial plan.

[code language=”text”]
[voceo-neomano]
exten => *2011,1,Set(PITCH_SHIFT(both)=.95)
exten => *2011,n,Dial(console/dsp,20,A(beep))
exten => *2011,n,Hangup()
[/code]

As you can see, we’ve set up a very small frequency offset, using the PITCH_SHIFT function. Ideally, it will be hardly noticeable. However, it should be enough to eliminate the annoying feedback.

I have chosen a value lesser than one, which means that the voice will sound slightly deeper. Well, that’s all; I hope this may come in handy.

Article taken from:
http://www.neomano.com/2011/09/sistema-de-voceo-anti-feedback-de-bajo-costo-para-elastix/

Integración de Elastix con Gtalk

Installing the GTalk support on Elastix is quite an easy task: There isn’t much to be done because the Asterisk’s version that comes from Elastix 2.2, already brings the support to talk with compiled GTalk. Instead, here I will explain how to configure it in order to receive calls on our Elastix using a GTalk account. Read more

Synchronizing Elastix’s Configuration with Dropbox

Now that all kinds of clouds are such a trend, many ideas on how to take advantage of them are starting to emerge. One of the most preferred options is backing up information. Many people therefore opt for synchronizing their files with the cloud not only for the sake of backing up, but also for storing, or spreading their information and making it accessible from several locations or devices.

In view of the above, I decided to back up Elastix to the cloud.

Read more

Sincronización de configuración de Elastix con Dropbox

Now that all kinds of clouds are such a trend, many ideas on how to take advantage of them are starting to emerge. One of the most preferred options is backing up information. Many people therefore opt for synchronizing their files with the cloud not only for the sake of backing up, but also for storing, or spreading their information and making it accessible from several locations or devices.

In view of the above, I decided to back up Elastix to the cloud.

Read more

Grandstream and Elastix Technology Partnership

GXP IP Phones Added To Elastix Education Centers in Latinamerica; New color display, Gigabit GXP21xx IP Phones Certified with Elastix Unified Communications Solutions Read more

Snom Expands Technology Partnership with Elastix

Snom 7xx series and snom 870 business phones achieve certification with the Elastix open source unified communications solution as snom continues to expand presence in Latin America Read more

VoIPon Solutions new partner in the UK

VoIPon Solutions is a trading division of Keison International Ltd., which has been successfully distributing industrial products around the world, for over 20 years. Read more