|
SOLVED: Outbound not working, Inbound calls OK 11 Months, 2 Weeks ago
|
Karma: 0
|
New install with a TE121. Inbound calls work fine, with outbound calls i am getting "All circuits busy" message. I have tried with 9 and 1 prefix, and without. Anything other than extensions and feature codes that I dial gets me this message. Any help would be greatly appreciated!
dahdi_scan
| Code: |
[1]
active=yes
alarms=OK
description=Wildcard TE121 Card 0
name=WCT1/0
manufacturer=Digium
devicetype=Wildcard TE121
location=PCI Bus 07 Slot 09
basechan=1
totchans=24
irq=146
type=digital-T1
syncsrc=1
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI
framing_opts=ESF,D4
coding=B8ZS
framing=ESF
|
| Code: |
# Autogenerated by /usr/sbin/dahdi_genconf on Fri Jun 8 07:02:09 2012
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCT1/0 "Wildcard TE121 Card 0" (MASTER)
span=1,1,0,esf,b8zs
# termtype: te
bchan=1-23
dchan=24
echocanceller=oslec,1-23
# Global data
loadzone = us
defaultzone = us
|
| Code: |
; Auto-generated by /usr/sbin/hardware_detector
[trunkgroups]
[channels]
context=from-pstn
switchtype=national
signalling=pri_cpe
group=1
channel => 1-23
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
relaxdtmf=yes
;Uncomment these lines if you have problems with the disconection of your analog lines
;busydetect=yes
;busycount=3
immediate=no
#include dahdi-channels.conf
#include chan_dahdi_additional.conf
|
| Code: |
Primary D-channel: 24
Status: Up, Active
Switchtype: National ISDN
Type: CPE
Remote type: Unknown node type
Overlap Dial: 0
Logical Channel Mapping: 0
Timer and counter settings:
N200: 3
N202: 3
K: 7
T200: 1000
T201: 1000
T202: 10000
T203: 10000
T303: 4000
T305: 30000
T308: 4000
T309: 6000
T312: 6000
T313: 4000
T-HOLD: 4000
T-RETRIEVE: 4000
T-RESPONSE: 4000
Q931 RX: 0
Q931 TX: 0
Q921 RX: 16
Q921 TX: 17
Q921 Outstanding: 0 (TEI=0)
Total active-calls:0 global:0
CC records:
Overlap Recv: No
|
| Code: |
-- Executing [2482222222@from-internal:1] Macro("SIP/121-00000004", "user-callerid,SKIPTTL,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/121-00000004", "AMPUSER=121") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/121-00000004", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/121-00000004", "1?Set(REALCALLERIDNUM=121)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/121-00000004", "AMPUSER=121") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/121-00000004", "AMPUSERCIDNAME=kmac") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/121-00000004", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/121-00000004", "AMPUSERCID=121") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/121-00000004", "CALLERID(all)="kmac" <121>") in new stack
-- Executing [s@macro-user-callerid:9] ExecIf("SIP/121-00000004", "0?Set(CHANNEL(language)=)") in new stack
-- Executing [s@macro-user-callerid:10] GotoIf("SIP/121-00000004", "1?continue") in new stack
-- Goto (macro-user-callerid,s,19)
-- Executing [s@macro-user-callerid:19] Set("SIP/121-00000004", "CALLERID(number)=121") in new stack
-- Executing [s@macro-user-callerid:20] Set("SIP/121-00000004", "CALLERID(name)=kmac") in new stack
-- Executing [s@macro-user-callerid:21] NoOp("SIP/121-00000004", "Using CallerID "kmac" <121>") in new stack
-- Executing [2482222222@from-internal:2] NoOp("SIP/121-00000004", "Calling Out Route: Outbound") in new stack
-- Executing [2482222222@from-internal:3] Set("SIP/121-00000004", "MOHCLASS=default") in new stack
-- Executing [2482222222@from-internal:4] Set("SIP/121-00000004", "_NODEST=") in new stack
-- Executing [2482222222@from-internal:5] Macro("SIP/121-00000004", "record-enable,121,OUT,") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/121-00000004", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] ExecIf("SIP/121-00000004", "0?MacroExit()") in new stack
-- Executing [s@macro-record-enable:5] GotoIf("SIP/121-00000004", "0?Group:OUT") in new stack
-- Goto (macro-record-enable,s,15)
-- Executing [s@macro-record-enable:15] GotoIf("SIP/121-00000004", "0?IN") in new stack
-- Executing [s@macro-record-enable:16] ExecIf("SIP/121-00000004", "1?MacroExit()") in new stack
-- Executing [2482222222@from-internal:6] Macro("SIP/121-00000004", "dialout-trunk,1,2482222222,") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/121-00000004", "DIAL_TRUNK=1") in new stack
-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/121-00000004", "0?sub-pincheck,s,1") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/121-00000004", "0?disabletrunk,1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/121-00000004", "DIAL_NUMBER=2482222222") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/121-00000004", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/121-00000004", "OUTBOUND_GROUP=OUT_1") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/121-00000004", "1?nomax") in new stack
-- Goto (macro-dialout-trunk,s,9)
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/121-00000004", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/121-00000004", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/121-00000004", "outbound-callerid,1") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/121-00000004", "0?Set(CALLERPRES()=)") in new stack
-- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/121-00000004", "0?Set(REALCALLERIDNUM=121)") in new stack
-- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/121-00000004", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing [s@macro-outbound-callerid:6] Set("SIP/121-00000004", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:7] Set("SIP/121-00000004", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:8] Set("SIP/121-00000004", "TRUNKOUTCID=3132222222") in new stack
-- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/121-00000004", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,12)
-- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/121-00000004", "1?Set(CALLERID(all)=3132222222)") in new stack
-- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/121-00000004", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/121-00000004", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:15] ExecIf("SIP/121-00000004", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack
-- Executing [s@macro-dialout-trunk:12] GosubIf("SIP/121-00000004", "0?sub-flp-1,s,1") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("SIP/121-00000004", "OUTNUM=2482222222") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/121-00000004", "custom=DAHDI/0") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/121-00000004", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default))") in new stack
-- Executing [s@macro-dialout-trunk:16] Macro("SIP/121-00000004", "dialout-trunk-predial-hook,") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/121-00000004", "") in new stack
-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/121-00000004", "0?bypass,1") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/121-00000004", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:19] Dial("SIP/121-00000004", "DAHDI/0/2482222222,300,") in new stack
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s@macro-dialout-trunk:20] NoOp("SIP/121-00000004", "Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 6") in new stack
-- Executing [s@macro-dialout-trunk:21] Goto("SIP/121-00000004", "s-CHANUNAVAIL,1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] Set("SIP/121-00000004", "RC=6") in new stack
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:2] Goto("SIP/121-00000004", "6,1") in new stack
-- Goto (macro-dialout-trunk,6,1)
-- Executing [6@macro-dialout-trunk:1] Goto("SIP/121-00000004", "continue,1") in new stack
-- Goto (macro-dialout-trunk,continue,1)
-- Executing [continue@macro-dialout-trunk:1] GotoIf("SIP/121-00000004", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,continue,3)
-- Executing [continue@macro-dialout-trunk:3] NoOp("SIP/121-00000004", "TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 6 - failing through to other trunks") in new stack
-- Executing [continue@macro-dialout-trunk:4] Set("SIP/121-00000004", "CALLERID(number)=121") in new stack
-- Executing [2482222222@from-internal:7] Macro("SIP/121-00000004", "outisbusy,") in new stack
-- Executing [s@macro-outisbusy:1] Progress("SIP/121-00000004", "") in new stack
-- Executing [s@macro-outisbusy:2] GotoIf("SIP/121-00000004", "0?emergency,1") in new stack
-- Executing [s@macro-outisbusy:3] GotoIf("SIP/121-00000004", "0?intracompany,1") in new stack
-- Executing [s@macro-outisbusy:4] Playback("SIP/121-00000004", "all-circuits-busy-now&pls-try-call-later, noanswer") in new stack
-- <SIP/121-00000004> Playing 'all-circuits-busy-now.gsm' (language 'en')
== Spawn extension (macro-outisbusy, s, 4) exited non-zero on 'SIP/121-00000004' in macro 'outisbusy'
|
|
|
kmac
Fresh Boarder
Posts: 2
|
|
Last Edit: 2012/06/08 06:46 By kmac.
|
|
|
Re: Outbound calls not working, Inbound calls OK 11 Months, 2 Weeks ago
|
Karma: 0
|
|
Well, seems like stupid user error.
For those looking into this issue in the future hopefully this will be helpful as I tore apart google for a good 24 hours.
You need to set your trunk Outbound CID. and when you do, make sure you include the <>'s
|
|
kmac
Fresh Boarder
Posts: 2
|
|
Last Edit: 2012/06/08 06:46 By kmac.Reason: marked solved
|
|
|
Search
2308 users online
