bar top left
bar top right
left curve
right curve
Welcome, Guest
Forgot your Password? Forgot your Username? Create Account
Elastix Forums :: Open Source Unified Communications Server
Elastix
Help

Can't access unembedded FreePBX in ver 2.2
(1 viewing) (1) Guest
Go to bottom
Post Reply
Post New Topic
Page: 1
TOPIC: Can't access unembedded FreePBX in ver 2.2
#92516
Can't access unembedded FreePBX in ver 2.2 5 Months ago Karma: 0
I've installed Elastix 2.2 and received a window with a message:
"You are not authorized to access this page.
Enable direct access (Non-embedded) to FreePBX in "Security >> Advanced Security Settings" menu."
Where's "Security >> Advanced Security Settings" menu?
Thanks
Enter code here   
Please note: although no board code and smiley buttons are shown, they are still usable.
Jack
Fresh Boarder
Posts: 23
graphgraph
User Offline Click here to see the profile of this user
Reply Quote
 
#92518
Re:Can't access unembedded FreePBX in ver 2.2 5 Months ago Karma: 181
On the home page of your Elastix GUI, there is a small tab with an Arrow down...click on this and select the Security option.

The Security Tab should now be showing as selected....

Then select Advanced Settings in the secondary menu

And you will see the options to turn on Unembedded Freepbx and set a password....

Regards

Bob
Enter code here   
Please note: although no board code and smiley buttons are shown, they are still usable.
Bob
http://twitter.com/elastixbob
Moderator
Posts: 1670
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Elastix Application Notes bobfryer@gmail.com Location: Canberra, Australia Birthday: 05/03
Good Etiquette : if someones helps with a solution - update their Karma - its only a simple click.

Upgrading Elastix? Read this FAQ Now!!
elx.ec/upgfaq

Elastix Docs :
elx.ec/elastixtutorials
www.elastixconnection.com

Elastix Fault Finding Guide
elx.ec/faultfind
Reply Quote
 
#92633
Re:Can't access unembedded FreePBX in ver 2.2 4 Months, 4 Weeks ago Karma: 0
Thank you for quick answer, I got it.
Enter code here   
Please note: although no board code and smiley buttons are shown, they are still usable.
Jack
Fresh Boarder
Posts: 23
graphgraph
User Offline Click here to see the profile of this user
Reply Quote
 
#94448
Re:Can't access unembedded FreePBX in ver 2.2 4 Months ago Karma: 0
Where exactly is that arrow? I cant anything of the sort.
Enter code here   
Please note: although no board code and smiley buttons are shown, they are still usable.
mugabenp
Fresh Boarder
Posts: 3
graphgraph
User Offline Click here to see the profile of this user
Reply Quote
 
#94468
Re:Can't access unembedded FreePBX in ver 2.2 4 Months ago Karma: 0
The pull down/side menu is there but once clicked there is no response.
x.x.x.x/index.php?menu=sec_advanced_settings
Enter code here   
Please note: although no board code and smiley buttons are shown, they are still usable.
mugabenp
Fresh Boarder
Posts: 3
graphgraph
User Offline Click here to see the profile of this user
Reply Quote
 
#94479
Re:Can't access unembedded FreePBX in ver 2.2 4 Months ago Karma: 0
A small triangle just to the right from the bookmark "Reports". My problem was the wrong work of the browser. If you have no mistakes on the page you'll see it.
Enter code here   
Please note: although no board code and smiley buttons are shown, they are still usable.
Jack
Fresh Boarder
Posts: 23
graphgraph
User Offline Click here to see the profile of this user
Reply Quote
 
#94485
Re:Can't access unembedded FreePBX in ver 2.2 4 Months ago Karma: 0
I will just re install the box. This way I will get to use it again.
Enter code here   
Please note: although no board code and smiley buttons are shown, they are still usable.
mugabenp
Fresh Boarder
Posts: 3
graphgraph
User Offline Click here to see the profile of this user
Reply Quote
 
#94973
Re:Can't access unembedded FreePBX in ver 2.2 3 Months, 4 Weeks ago Karma: 0
Hy everibody..

i am still having this problem...

Unauthorized
You are not authorized to access this page.
Enable direct access (Non-embedded) to FreePBX in "Security >> Advanced Security Settings" menu.

and when a go to the menu tring to enable de acces, i get a ERROR:
Access direct to FreePBX has not been enabled

what can i do?
Enter code here   
Please note: although no board code and smiley buttons are shown, they are still usable.
samuel_bigas
Fresh Boarder
Posts: 1
graphgraph
User Offline Click here to see the profile of this user
Reply Quote
 
Go to top
Post Reply
Post New Topic
Page: 1
Elastix Forums :: Open Source Unified Communications Server
Elastix
Help
Moderators: Bob, jgutierrez
Powered by Kunena | KunenaSpanishget the latest posts directly to your desktop

Copyright © 2006 - 2012 PaloSanto Solutions. All Rights Reserved.

Banner
Protected by Spam Fighter