Whenever I try to drag calls to the Parking Lot or On Hold, FOP would drop my calls. It works fine if I drag and drop to available lines, but not when I have an active call. I have searched online and have found similar problm, such as the link below. I have tried their solution but still the FOP is not working correctly. I even installed the HUDLite server and is getting the same results.

What am I doing wrong? TIA!


www.freepbx.org/forum/freepbx/users/flas...ot-transfering-calls

Here is the log when I tried to park the call using FOP. This is the default setting after installing Elastix. Somehow the FOP doesn't work.


dialparties.agi: Caller ID name is 'Mobile' number is '5234'
dialparties.agi: Methodology of ring is 'none'
-- dialparties.agi: Added extension 5334 to extension map
-- dialparties.agi: Extension 5334 cf is disabled
-- dialparties.agi: Extension 5334 do not disturb is disabled
dialparties.agi: Extension 5334 has ExtensionState: 0
-- dialparties.agi: Checking CW and CFB status for extension 5334
-- dialparties.agi: dbset CALLTRACE/5334 to 5234
-- dialparties.agi: Filtered ARG3: 5334
== Manager 'admin' logged off from 127.0.0.1
-- AGI Script dialparties.agi completed, returning 0
-- Executing [s@macro-dial:7] Dial("SIP/5234-0a14ce58", "SIP/5334||tr") in new stack
-- Called 5334
-- SIP/5334-0a1015a8 is ringing
-- SIP/5334-0a1015a8 answered SIP/5234-0a14ce58
-- Executing [h@macro-dial:1] Macro("SIP/5234-0a14ce58", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("SIP/5234-0a14ce58", "w") in new stack
== Starting SIP/5334-0a1015a8 at parkedcalls,71,1 failed so falling back to exten 's'
== Starting SIP/5334-0a1015a8 at parkedcalls,s,1 still failed so falling back to context 'default'
-- Executing [s@default:1] Playback("SIP/5334-0a1015a8", "vm-goodbye") in new stack
-- <SIP/5334-0a1015a8> Playing 'vm-goodbye' (language 'en')
-- Executing [s@macro-hangupcall:2] NoCDR("SIP/5234-0a14ce58", "") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("SIP/5234-0a14ce58", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("SIP/5234-0a14ce58", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("SIP/5234-0a14ce58", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("SIP/5234-0a14ce58", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/5234-0a14 ce58' in macro 'hangupcall'
== Spawn h extension (macro-dial, h, 1) exited non-zero on 'SIP/5234-0a14ce58'
== Spawn extension (macro-dial, s, 7) exited non-zero on 'SIP/5234-0a14ce58' in macro 'dial'
== Spawn extension (macro-exten-vm, s, 9) exited non-zero on 'SIP/5234-0a14ce58' in macro 'exten-vm'
== Spawn extension (from-internal, 5334, 1) exited non-zero on 'SIP/5234-0a14ce58'
-- Executing [s@default:2] Macro("SIP/5334-0a1015a8", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("SIP/5334-0a1015a8", "w") in new stack
-- Executing [s@macro-hangupcall:2] NoCDR("SIP/5334-0a1015a8", "") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("SIP/5334-0a1015a8", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("SIP/5334-0a1015a8", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("SIP/5334-0a1015a8", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("SIP/5334-0a1015a8", "") in new stack

It's well past time that Elastix should come up with own operator panel. I have the same problem but this post seems promising:

fonality.com/trixbox/forums/trixbox-foru...p-transfer-call-help

-Bruce

Thanks for posting the link. I basically have given up on this and just tell users to transfers via the transfer button on the phone.

It's easier to handle the phone than to drag and drop.

Now, I can confirm that this works. Though, I still firmly believe that it's about time Elastix gets it's own operator panel. Here is the process:

1) create a misc dest, call it "park-dest" and make the dial value 70.
2) create a custom extension, make it whatever you want. I made mine 7000 and named it "Xfer Park".
3) create a follow me for that extension that has the failover set to park-dest.
Now, when you want to park a call, drag and drop to the "Xfer Park" extension.
There's no way to drag directly to a parking spot AFAIK. Also, this does not announce to the transferring party which parking spot the call went to, you have to just look at the screen.

-Bruce