Hello all
i am trying to get an IP trunk H.323 working between Avaya PBX and Elastix

so far i can call from Avaya x 2270 to exten 4420 or trunk access code 730 toward Elastix and it ring once and i get Goodbye and a disconnect.

from the Elastix with sip softphone i was able once to call 2270 and the Avaya phone rang and after answering i have no talk path.

Now when i call 2270 i have ringback but the Avaya 2270 does not ring anymore.

i don't know what i am missing.
i have try numerous config found on the web but no luck so far.

I have a second Trixbox and i have the same result. That is why i built a Elastix today thinking that it would work right off the box, but this is not the case.

Any help is welcome. about the link and codec.

Daniel

I have Asterisk and Avaya talking between each other. I do know that only certain version of the Avaya works. Let me know what model of the Avaya you have and I'll find the instructions tomorrow.

I have a Prologix
System: G3csiV12 Software Version: R012i.00.1.224.0

i also have a S8300/G700
Software Version: R014x.00.4.739.0

Voici mon 00h323.conf

[general]
port=1720
bindaddr=172.16.58.111
progress_setup=8
progress_alert=8
faststart=yes
h245tunneling=yes
gatekeeper=DISABLE
disallow=all
allow=ulaw
dtmfmode=inband
context=internal

[definity]
type=friend
context=internal
host=172.16.58.24
port=1720
disallow=all
allow=ulaw
canreinvite=no
dtmfmode=internal

Show channeltypes

Type Description Devicestate Indications Transfer
---------- ----------- ----------- ----------- --------
Agent Call Agent Proxy Channel yes yes no
Phone Standard Linux Telephony API Driver no yes no
MGCP Media Gateway Control Protocol (MGCP) yes yes no
OOH323 Objective Systems H323 Channel Driver no yes no
IAX2 Inter Asterisk eXchange Driver (Ver 2) yes yes yes
SIP Session Initiation Protocol (SIP) yes yes yes
Local Local Proxy Channel Driver yes yes no
DAHDI DAHDI Telephony Driver w/PRI w/OPENR2 no yes no
----------
8 channel drivers registered.
The 'show channeltypes' command is deprecated and will be removed in a future release. Please use 'core show channeltypes' instead.

Call from 2270 Avaya to 2525 Elastix

Welcome to Elastix
----------------------------------------------------

To access your Elastix System, using a separate workstation (PC/MAC/Linux)
Open the Internet Browser using the following URL:
172.16.58.111

[root@elastix ~]# asterisk -rvvvv
Asterisk 1.4.25, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
== Parsing '/etc/asterisk/asterisk.conf': Found
== Parsing '/etc/asterisk/extconfig.conf': Found
Connected to Asterisk 1.4.25 currently running on elastix (pid = 2616)
Verbosity is at least 4
== Starting OOH323/(null)-0f36 at internal,2525,1 failed so falling back to exten 's'
== Starting OOH323/(null)-0f36 at internal,s,1 still failed so falling back to context 'default'
-- Executing [s@default:1] Playback("OOH323/(null)-0f36", "vm-goodbye") in new stack
-- <OOH323/(null)-0f36> Playing 'vm-goodbye' (language 'en')
-- Executing [s@default:2] Macro("OOH323/(null)-0f36", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("OOH323/(null)-0f36", "w") in new stack
-- Executing [s@macro-hangupcall:2] NoCDR("OOH323/(null)-0f36", "") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("OOH323/(null)-0f36", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("OOH323/(null)-0f36", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("OOH323/(null)-0f36", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("OOH323/(null)-0f36", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'OOH323/(null)-0f36' in macro 'hangupcall'
== Spawn extension (default, s, 2) exited non-zero on 'OOH323/(null)-0f36'
elastix*CLI>



Call from 2001 Elastic to 2270 Avaya

[root@elastix ~]# asterisk -rvvv
Asterisk 1.4.25, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
== Parsing '/etc/asterisk/asterisk.conf': Found
== Parsing '/etc/asterisk/extconfig.conf': Found
Connected to Asterisk 1.4.25 currently running on elastix (pid = 2616)
Verbosity is at least 4
-- Executing [2270@from-internal:1] Set("SIP/2001-09be9d10", "INTRACOMPANYROUTE=YES") in new stack
-- Executing [2270@from-internal:2] Macro("SIP/2001-09be9d10", "user-callerid|SKIPTTL|") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/2001-09be9d10", "AMPUSER=2001") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/2001-09be9d10", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/2001-09be9d10", "1|Set|REALCALLERIDNUM=2001") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/2001-09be9d10", "AMPUSER=2001") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/2001-09be9d10", "AMPUSERCIDNAME=Daniel 2001") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/2001-09be9d10", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/2001-09be9d10", "AMPUSERCID=2001") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/2001-09be9d10", "CALLERID(all)="Daniel 2001" <2001>") in new stack
-- Executing [s@macro-user-callerid:9] Set("SIP/2001-09be9d10", "REALCALLERIDNUM=2001") in new stack
-- Executing [s@macro-user-callerid:10] ExecIf("SIP/2001-09be9d10", "0|Set|CHANNEL(language)=") in new stack
-- Executing [s@macro-user-callerid:11] GotoIf("SIP/2001-09be9d10", "1?continue") in new stack
-- Goto (macro-user-callerid,s,20)
-- Executing [s@macro-user-callerid:20] NoOp("SIP/2001-09be9d10", "Using CallerID "Daniel 2001" <2001>") in new stack
-- Executing [2270@from-internal:3] Set("SIP/2001-09be9d10", "_NODEST=") in new stack
-- Executing [2270@from-internal:4] Macro("SIP/2001-09be9d10", "record-enable|2001|OUT|") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/2001-09be9d10", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("SIP/2001-09be9d10", "recordingcheck|20091008-065940|1254999580.48") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20091008-065940|1254999580.48: Outbound recording not enabled
-- AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable:5] MacroExit("SIP/2001-09be9d10", "") in new stack
-- Executing [2270@from-internal:5] Macro("SIP/2001-09be9d10", "dialout-trunk|2|2270||") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/2001-09be9d10", "DIAL_TRUNK=2") in new stack
-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/2001-09be9d10", "0?sub-pincheck|s|1") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/2001-09be9d10", "0?disabletrunk|1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/2001-09be9d10", "DIAL_NUMBER=2270") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/2001-09be9d10", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/2001-09be9d10", "OUTBOUND_GROUP=OUT_2") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/2001-09be9d10", "0?nomax") in new stack
-- Executing [s@macro-dialout-trunk:8] GotoIf("SIP/2001-09be9d10", "0?chanfull") in new stack
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/2001-09be9d10", "1?skipoutcid") in new stack
-- Goto (macro-dialout-trunk,s,12)
-- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/2001-09be9d10", "0|AGI|fixlocalprefix") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("SIP/2001-09be9d10", "OUTNUM=2270") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/2001-09be9d10", "custom=AMP") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/2001-09be9d10", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^)tr") in new stack
-- Executing [s@macro-dialout-trunk:16] Macro("SIP/2001-09be9d10", "dialout-trunk-predial-hook|") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/2001-09be9d10", "") in new stack
-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/2001-09be9d10", "0?bypass|1") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/2001-09be9d10", "1?customtrunk") in new stack
-- Goto (macro-dialout-trunk,s,21)
-- Executing [s@macro-dialout-trunk:21] Set("SIP/2001-09be9d10", "pre_num=AMP:OOH323/") in new stack
-- Executing [s@macro-dialout-trunk:22] Set("SIP/2001-09be9d10", "the_num=OUTNUM") in new stack
-- Executing [s@macro-dialout-trunk:23] Set("SIP/2001-09be9d10", "post_num=@172.16.58.24:1720") in new stack
-- Executing [s@macro-dialout-trunk:24] GotoIf("SIP/2001-09be9d10", "1?outnum:skipoutnum") in new stack
-- Goto (macro-dialout-trunk,s,25)
-- Executing [s@macro-dialout-trunk:25] Set("SIP/2001-09be9d10", "the_num=2270") in new stack
-- Executing [s@macro-dialout-trunk:26] Dial("SIP/2001-09be9d10", "OOH323/2270@172.16.58.24:1720|300|tr") in new stack
-- Called 2270@172.16.58.24:1720
== Spawn extension (macro-dialout-trunk, s, 26) exited non-zero on 'SIP/2001-09be9d10' in macro 'dialout-trunk'
== Spawn extension (from-internal, 2270, 5) exited non-zero on 'SIP/2001-09be9d10'
-- Executing [h@macro-dialout-trunk:1] Macro("SIP/2001-09be9d10", "hangupcall|") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("SIP/2001-09be9d10", "w") in new stack
-- Executing [s@macro-hangupcall:2] NoCDR("SIP/2001-09be9d10", "") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("SIP/2001-09be9d10", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("SIP/2001-09be9d10", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("SIP/2001-09be9d10", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("SIP/2001-09be9d10", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/2001-09be9d10' in macro 'hangupcall'
== Spawn extension (macro-dialout-trunk, h, 1) exited non-zero on 'SIP/2001-09be9d10'
elastix*CLI>

The Avaya systems we have are the IP Office. This is what I have in our H323 file: